SETTLEMENT AGREEMENT BETWEEN

THE UNITED STATES OF AMERICA

AND

THE CITY OF GALLUP, NEW MEXICO

UNDER THE AMERICANS WITH DISABILITIES ACT

DJ 204-49-77

BACKGROUND

SCOPE OF THE INVESTIGATION

The United States Department of Justice (Department) initiated this matter as a compliance review of the City of Gallup, New Mexico (City) under title II of the Americans with Disabilities Act of 1990 (ADA), 42 U.S.C. §§ 12131-12134, and the Department’s implementing regulation, 28 C.F.R. Part 35. Because the City receives financial assistance from the Department of Justice, the review was also conducted under the authority of section 504 of the Rehabilitation Act of 1973, 29 U.S.C. § 794, and the Department’s implementing regulation, 28 C.F.R. Part 42, Subpart

The review was conducted by the Disability Rights Section of the Department’s Civil Rights Division and focused on the City’s compliance with the following title II requirements:

to conduct a self-evaluation of its services, policies, and practices by July 26, 1992, and make modifications necessary to comply with the Department’s title II regulation, 28 C.F.R. § 35.105;

to notify applicants, participants, beneficiaries, and other interested persons of their rights and the City’s obligations under title II and the Department’s regulation, 28 C.F.R. § 35.106;

to designate a responsible employee to coordinate its efforts to comply with and carry out the City’s ADA responsibilities, 28 C.F.R. § 35.107(a);

to establish a grievance procedure for resolving complaints of violations of title II, 28 C.F.R. § 35.107(b);

to operate each program, service, or activity so that, when viewed in its entirety, it is readily accessible to and usable by individuals with disabilities, 28 C.F.R. § 35.150, by:

delivery of services, programs, or activities in alternate ways, including, for example, redesign of equipment, reassignment of services, assignment of aides, home visits, or other methods of compliance or, if these methods are not effective in making the programs accessible,

physical changes to buildings (required to have been made by January 26, 1995), in accordance with the Department’s title II regulation, 28 C.F.R. § 35.151, and the ADA Standards for Accessible Design (Standards), 28 C.F.R. pt. 36, App. A, or the Uniform Federal Accessibility Standards (UFAS), 41 C.F.R. § 101-19.6, App. A.

to ensure that facilities for which construction or alteration was begun after January 26, 1992, are readily accessible to and usable by people with disabilities, in accordance with 1) the Department’s title II regulation and 2) the Standards or UFAS, 28 C.F.R. § 35.151;

to ensure that communications with applicants, participants, and members of the public with disabilities are as effective as communications with others, including furnishing auxiliary aids and services when necessary, 28 C.F.R. § 35.160;

to provide direct access via TTY (text telephone) or computer-to-telephone emergency services, including 9-1-1 services, for persons who use TTY’s and computer modems, 28 C.F.R. § 35.162;

to provide information for interested persons with disabilities concerning the existence and location of the City’s accessible services, activities, and facilities, 28 C.F.R. § 35.163(a); and

to provide signage at all inaccessible entrances to each of its facilities, directing users to an accessible entrance or to information about accessible facilities, 28 C.F.R. § 35.163(b).

As part of its compliance review, the Department reviewed the following facility, which – because construction or alterations commenced after January 26, 1992 – must comply with the ADA’s new construction or alterations requirements: the Northside Fire Station.

The Department’s program access review covered those of the City’s programs, services, and activities that operate in the following facilities: Gallup Sports Complex, City of Gallup Municipal Building, City Hall Annex (Gallup Joint Utilities), City Parking at Second and Aztec Streets, Children’s Library, Octavia Fellin Library, Gallup Municipal Airport, Gallup Police Department/Municipal Court, Larry Brian Mitchell Recreation Center, Harry Runnels Swimming Pool, Playground of Dreams, Hadden Park, Tom Saucedo Memorial Park, Bubany Park, Neighborhood Center, Northside Senior Center, the Senior Citizens Center, Parking at First and Aztec Streets, Gallup Rex Museum, Fire Department #1, Gallup Cultural Center, Tony Esparza Memorial Park, Golden Age Park, City Golf Course, Aileen Roat Park, Fitness Center, Annie Walker Memorial Park, and Red Rock State Park.

The Department conducted a program access review of the following polling places: Jefferson Elementary School, Washington Elementary School, Gallup Middle School, Red Rock Elementary School, Juan de Onate Elementary School, Roosevelt Elementary School, Rocky View Elementary School, Stagecoach Elementary School, Lincoln Elementary School, and J. F. K. Middle School. This review was limited to the areas of the facilities used by the voting public: parking, the route from the parking area to the area used for voting, and the area used for voting.

Finally, the Department reviewed the City of Gallup’s Police Department’s policies and procedures regarding providing effective communication to persons who are deaf or hard-of-hearing.

JURISDICTION

1. The ADA applies to the City because it is a “public entity” as defined by title II. 42 U.S.C. § 12131(1).

2. The Department is authorized under 28 C.F.R. Part 35, Subpart F, to determine the compliance of the City with title II of the ADA and the Department's title II implementing regulation, to issue findings, and, where appropriate, to negotiate and secure voluntary compliance agreements. Furthermore, the Attorney General is authorized, under 42 U.S.C. § 12133, to bring a civil action enforcing title II of the ADA should the Department fail to secure voluntary compliance pursuant to Subpart F.

3. The Department is authorized under 28 C.F.R. Part 42, Subpart G, to determine the City’s compliance with section 504 of the Rehabilitation Act of 1973, to issue findings, and, where appropriate, to negotiate and secure voluntary compliance agreements. Furthermore, the Attorney General is authorized, under 29 U.S.C. § 794 and 28 C.F.R. §§ 42.530 and 42.108-110, to suspend or terminate financial assistance to the City provided by the Department of Justice should the Department fail to secure voluntary compliance pursuant to Subpart G or to bring a civil suit to enforce the rights of the United States under applicable federal, state, or local law.

4. The parties to this Agreement are the United States of America and the City of Gallup, New Mexico.

5. In order to avoid the burdens and expenses of an investigation and possible litigation, the parties enter into this Agreement.

6. In consideration of, and consistent with, the terms of this Agreement, the Attorney General agrees to refrain from filing a civil suit in this matter regarding all matters contained within this Agreement, except as provided in the section entitled “Implementation and Enforcement.”

ACTIONS TAKEN BY CITY

7. Prior to an election, the City Clerk or a staff member will go the homes of individuals with disabilities who are not able to get to an accessible polling place.

8. The City ensures that each 9-1-1 call station is equipped with a TTY or computer equivalent.

9. The City has developed procedures for answering 9-1-1 calls that include training all call takers to use a TTY to take 9-1-1 calls, to recognize a “silent” open line as a potential TTY call and respond by TTY, and to ensure that TTY calls are answered as quickly as other calls received.

REMEDIAL ACTION

NOTIFICATION

10. Within two months of the effective date of this Agreement, the City will adopt the attached Notice (Attachment A); distribute it to all agency heads; publish the Notice in a local newspaper of general circulation serving the City; post the Notice on its Internet Home Page; and post copies in conspicuous locations in its public buildings. It will refresh the posted copies, and update the contact information contained on the Notice, as necessary, for the life of this Agreement. Copies will also be provided to any person upon request.

11. Within three months of the effective date of this Agreement, and on yearly anniversaries of this Agreement until it expires, the City will implement and report to the Department its written procedures for providing information for interested persons with disabilities concerning the existence and location of the City’s accessible programs, services, and activities.

ADA COORDINATOR

12. Within three months of the effective date of this Agreement, the City will appoint or hire one or more ADA Coordinator(s). The ADA Coordinator(s) will coordinate the City’s effort to comply with and carry out its responsibilities under the ADA, including any investigation of complaint communicated to it alleging its noncompliance with title II or alleging any actions that would be prohibited under title II. The City will make available to all interested individuals the name(s), office address(es), and telephone number(s) of the ADA Coordinator(s).

GRIEVANCE PROCEDURE

13. Within three months of the effective date of this Agreement, the City will adopt the attached ADA Grievance Procedure (Attachment B), distribute it to all agency heads, and post copies of it in conspicuous locations in each of its public buildings. It will refresh the posted copies, and update the contact information contained on it, as necessary, for the life of the Agreement. Copies will also be provided to any person upon request.

GENERAL EFFECTIVE COMMUNICATION PROVISIONS

14. Within six months of the effective date of this Agreement, the City will identify sources of qualified sign language and oral interpreters, real-time transcription services, and vendors that can put documents in Braille, and will implement and report to the Department its written procedures, with time frames, for fulfilling requests from the public for sign language or oral interpreters, real-time transcription services, and documents in alternate formats (Braille, large print, cassette tapes, etc.), to the extent that doing so does not impose an undue burden.

15. The City will take steps to ensure that all appropriate employees are trained and practiced in using the New Mexico Relay Service to make and receive calls.

LAW ENFORCEMENT AND EFFECTIVE COMMUNICATION

16. Within three months of the effective date of this Agreement, the City will adapt for its own use and implement the City of Gallup’s Police Department’s Policy Statement on Effective Communication with People Who are Deaf or Hard of Hearing [Attachment C] and distribute to all police department’s officers the Guide for Law Enforcement Officers When in Contact with People Who are Deaf or Hard of Hearing [Attachment D].

17. Within three months of the effective date of this Agreement, the City will contract with one or more local qualified oral/sign language interpreter agencies to ensure that the interpreting services will be available on a priority basis, twenty-four hours per day, seven days a week, to its police department or make other appropriate arrangements (such as contracting directly with or hiring qualified interpreters), to the extent that doing so does not impose an undue burden.

18. Within three months of the effective date of this Agreement, the City will request that the Jail Authority Board ensure that each detention area is equipped with a working TTY to enable City inmates who are deaf, hard of hearing, or who have speech impairments to make outgoing telephone calls. Where inmate telephone calls are time-limited, the City will request the Jail Authority Board to adopt policies permitting City inmates who use TTY’s a longer period of time to make those calls, due to the slower nature of TTY communications compared with voice communications.

EMPLOYMENT

19. Within six months of the effective date of this Agreement, the City will amend its employment policies, as necessary, to comply with the regulations of the U.S. Equal Employment Opportunity Commission implementing title I of the Americans with Disabilities Act of 1990, codified at 29 C.F.R. Part 1630. At minimum, those policies will provide that the City:

will not discriminate on the basis of disability in its hiring or employment practices.

will not ask a job applicant about the existence, nature, or severity of a disability. Applicants may be asked about their ability to perform specific job functions. Medical examinations or inquiries may be made, but only after a conditional offer of employment is made and only if required of all applicants for the position.

will make reasonable accommodations for the known physical or mental limitations of a qualified applicant or employee with a disability upon request unless the accommodation would cause an undue hardship on the operation of the City’s business.

if an applicant or employee requests a reasonable accommodation and the individual’s disability and need for the accommodation are not readily apparent or otherwise known, Gallup may ask the individual for information necessary to determine if the individual has a disability-related need for the accommodation.

will maintain any employee’s medical records separate from personnel files and keep them confidential.

will make an individualized assessment of whether a qualified individual with a disability meets selection criteria for employment decisions. To the extent the City’s selection criteria have the effect of disqualifying an individual because of disability, those criteria will be job-related and consistent with business necessity.

VOTING

20. Some of the City polling places may be owned or operated by other public entities subject to title II or by public accommodations subject to title III and, as such, would be subject to the obligation to provide program access or to remove barriers to accessibility under the ADA. This Agreement does not limit such future enforcement action against the owners or operators of these polling places by any person or entity, including the Department.

21. Within one month of the effective date of this Agreement, the City will request in writing that each of the owners and operators of the polling places listed in Attachment E below will remove the noted barriers to access for persons with disabilities and the City will distribute to them the Department’s ADA Checklist for Polling Places (www.ada.gov/votingck.htm). The request will specify that the remediation be completed within one year of the effective date of this Agreement. The City will simultaneously send a courtesy copy of the request to the Department.

22. Within 14 months of the effective date of this Agreement, the City will survey all facilities mentioned in Attachment E to determine whether the actions requested by the City have been implemented. If not, for each polling place that still contains inaccessible parking, exterior route, entrance, or interior route to the voting area, the City will identify within 18 months of the effective date of this Agreement an alternate location where these elements are accessible. That identification will utilize the survey instrument that appears as Attachment F to this Agreement. The City will then take immediate steps to change its polling place to the new location.

23. Within three months of the effective date of this Agreement, the City will provide opportunities for same-day balloting for voters with disabilities whose assigned polling place does not have accessible parking, exterior route, entrance, and interior route to the voting area. The method for providing these opportunities may include allowing the individual to vote at another nearby location that is accessible, vote by an absentee ballot that is accepted if postmarked on the day of the election (or picked up by election officials at the home of the voter on the same day as the election), provide curbside voting at the inaccessible polling place, or any other method that ensures that disabled voters have the same degree of information available to them when casting their ballots as others.

24. Within the month prior to the next election that utilizes the City’s polling places, and at yearly anniversaries of the effective date of this Agreement until it expires, the City will train poll workers on the rights of people with disabilities and the practical aspects of assuring those rights. The training will cover, at minimum, the need to maintain the physical accessibility of polling locations; how to assist people with disabilities, as necessary; and how to operate any non-standard voting equipment or accessible features of standard equipment (particularly new, accessible equipment).

EMERGENCY MANAGEMENT PROCEDURES AND POLICIES

25. If the City contracts with another entity, such as the American Red Cross or another local government, to provide its emergency preparedness plans and emergency response services, the City will ensure that the other entity complies with the following provisions on its behalf.

26. Within nine months of the effective date of this Agreement, the City will implement and report to the Department its written procedures that ensure that it regularly solicits and incorporates input from persons with a variety of disabilities and those who serve them regarding all phases of its emergency management plan (preparation, notification, response, and clean up).

27. Within nine months of the effective date of this Agreement, the City will implement and report to the Department its written procedures that ensure that at least one emergency shelter has a back-up generator and a way to keep medications refrigerated (such as a refrigerator or a cooler with ice). Such shelter(s) will be made available to persons whose disabilities require access to electricity and refrigeration, for example, for using life-sustaining medical devices, providing power to motorized wheelchairs, and preserving certain medications, such as insulin, that require refrigeration. The written procedures will include a plan for notifying persons of the location of such shelter(s).

28. Within nine months of the effective date of this Agreement, the City will implement and report to the Department its written procedures that ensure that persons who use service animals are not separated from their service animals when sheltering during an emergency, even if pets are normally prohibited in shelters. The procedures will not unnecessarily segregate persons who use service animals from others but may take into account the potential presence of persons who, for safety or health reasons, should not be in contact with certain types of animals.

29. Some of the City’s emergency shelters may be owned or operated by other public entities subject to title II or by public accommodations subject to title III and, as such, are subject to the obligation to provide program access or remove barriers to accessibility under the ADA. This Agreement does not limit such future enforcement action against the owners or operators of these facilities by any person or entity, including the Department.

30. Within one year of the effective date of this Agreement, and until all emergency shelters have accessible parking, exterior routes, entrances, interior routes to the shelter area, and toilet rooms serving the shelter area, the City will identify and widely publicize to the public and to persons with disabilities and the organizations that serve them the most accessible emergency shelters.

SIDEWALKS

31. Within six months of the effective date of this Agreement, the City will implement and report to the Department its written process for soliciting and receiving input from persons with disabilities regarding the accessibility of its sidewalks, including, for example, requests to add curb cuts at particular locations.

32. Within ten years of the effective date of this Agreement, the City will provide curb ramps or other sloped areas complying with the Standards or UFAS at all places where City-managed streets, roads, and highways intersect with street level pedestrian walkways.

33. Beginning no later than three months after the effective date of this Agreement, the City will provide curb ramps or other sloped areas complying with the Standards or UFAS at any intersection having curbs or other barriers to entry from a street level pedestrian walkway, whenever a new street, road, or highway is constructed or altered. Paving, repaving, or resurfacing a street, road, or highway is considered an alteration for the purposes of this Agreement. Filling a pothole is not considered an alteration for the purposes of this Agreement.

34. Beginning no later than three months after the effective date of this Agreement, the City will provide curb ramps or other sloped areas complying with the Standards or UFAS at all newly constructed or altered pedestrian walkways where they intersect a street, road, or highway.

WEB-BASED SERVICES AND PROGRAMS

35. Within three months of the effective date of this Agreement, and on subsequent anniversaries of the effective date of this Agreement, the City will distribute to all persons – employees and contractors – who design, develop, maintain, or otherwise have responsibility for content and format of its website(s) or third party websites used by the City (Internet Personnel) the technical assistance document, “Accessibility of State and Local Government Websites to People with Disabilities,” which is Attachment G to this Agreement (it is also available at www.ada.gov/websites2.htm).

36. Within nine months of the effective date of this Agreement, and throughout the life of the Agreement, the City will do the following:

A. Establish, implement, and post online a policy that its web pages will be accessible and create a process for implementation;

B. Ensure that all new and modified web pages and content are accessible;

C. Develop and implement a plan for making existing web content more accessible;

D. Provide a way for online visitors to request accessible information or services by posting a telephone number or e-mail address on its home page; and

E. Periodically (at least annually) enlist persons with disabilities to test its pages for ease of use.

PHYSICAL CHANGES TO FACILITIES

37. The elements or features of the City’s facilities that do not comply with the Standards, including those listed in Attachments H and I prevent persons with disabilities from fully and equally enjoying the City’s services, programs, or activities and constitute discrimination on the basis of disability within the meaning of 42 U.S.C. § 12132 and 28 C.F.R. §§ 35.149 and 35.150.

38. The City will comply with the cited provisions of the Standards when taking the actions required by this Agreement.

39. Within 12 months of the effective date of this Agreement, the City will install signage as necessary to comply with 28 C.F.R. § 35.163(b), after having surveyed all facilities that are the subject of this Agreement for the purpose of identifying those that have multiple entrances not all of which are accessible.

40. Newly Constructed Facilities: In order to ensure that the spaces and elements in City facilities for which construction was commenced after January 26, 1992, are readily accessible to and usable by persons with disabilities, the City will take the actions listed in Attachment H.

41. Program Access in City Existing Facilities: In order to ensure that each of the City’s programs, services, and activities operating at a facility that is the subject of this Agreement, when viewed in its entirety, is readily accessible to and usable by persons with mobility impairments, the City will take the actions listed in Attachment I.

MISCELLANEOUS PROVISIONS

42. Except as otherwise specified in this Agreement, at yearly anniversaries of the effective date of this Agreement until it expires, the City will submit written reports to the Department summarizing the actions the City has taken pursuant to this Agreement. Reports will include detailed photographs showing measurements, architectural plans, work orders, notices published in the newspaper, copies of adopted policies, and proof of efforts to secure funding/assistance for structural renovations or equipment.

43. Throughout the life of this Agreement, consistent with 28 C.F.R. § 35.133(a), the City will maintain the accessibility of its programs, activities, services, facilities, and equipment, and will take whatever actions are necessary (such as routine testing of accessibility equipment and routine accessibility audits of its programs and facilities) to do so. This provision does not prohibit isolated or temporary interruptions in service or access due to maintenance or repairs. 28 C.F.R. § 35.133(b).

44. Within 12 months of the effective date of this Agreement, the City will develop or procure a two-hour training program on the requirements of the ADA and appropriate ways of serving persons with disabilities. The City will use the ADA technical assistance materials developed by the Department and will consult with interested persons, including individuals with disabilities, in developing or procuring the ADA training program.

45. Within one year of the effective date of this Agreement, the City will deliver its training program to all City employees who have direct contact with members of the public. At the end of that period, the City will submit a copy of its training curriculum and materials to the Department, along with a list of employees trained and the name, title, and address of the trainer.

IMPLEMENTATION AND ENFORCEMENT

46. If at any time the City desires to modify any portion of this Agreement because of changed conditions making performance impossible or impractical or for any other reason, it will promptly notify the Department in writing, setting forth the facts and circumstances thought to justify modification and the substance of the proposed modification. Until there is written Agreement by the Department to the proposed modification, the proposed modification will not take effect. These actions must receive the prior written approval of the Department, which approval will not be unreasonably withheld or delayed.

47. The Department may review compliance with this Agreement at any time. If the Department believes that the City has failed to comply in a timely manner with any requirement of this Agreement without obtaining sufficient advance written agreement with the Department for a modification of the relevant terms, the Department will so notify the City in writing and it will attempt to resolve the issue or issues in good faith. If the Department is unable to reach a satisfactory resolution of the issue or issues raised within 60 days of the date it provides notice to the City, it may institute a civil action in federal district court to enforce the terms of this Agreement, or it may initiate appropriate steps to enforce title II and section 504 of the Rehabilitation Act.

48. For purposes of the immediately preceding paragraph, it is a violation of this Agreement for the City to fail to comply in a timely manner with any of its requirements without obtaining sufficient advance written agreement with the Department for an extension of the relevant time frame imposed by the Agreement.

49. Failure by the Department to enforce this entire Agreement or any provision thereof with regard to any deadline or any other provision herein will not be construed as a waiver of the Department's right to enforce other deadlines and provisions of this Agreement.

50. This Agreement is a public document. A copy of this document or any information contained in it will be made available to any person by the City or the Department on request.

51. This Agreement constitutes the entire agreement between the parties on the matters raised herein, and no other statement, promise, or agreement, either written or oral, made by either party or agents of either party, that is not contained in this written Agreement (including its Attachments, which are hereby incorporated by reference), will be enforceable. This Agreement does not purport to remedy any other potential violations of the ADA or any other federal law. This Agreement does not affect the City’s continuing responsibility to comply with all aspects of the ADA and section 504 of the Rehabilitation Act.

52. This Agreement will remain in effect for five years, except that paragraphs 31-34, 42 - 43, and 46 - 54 shall remain in effect for ten years and six months.

53. The person signing for the City represents that he or she is authorized to bind the City to this Agreement.

54. The effective date of this Agreement is the date of the last signature below.

For the City : For the United States:

By:
BOB ROSEBROUGH, Mayor

Attest:
RUTH RUIZ, City Clerk

Date:      8/11/04

R. ALEXANDER ACOSTA
Assistant Attorney General for Civil Rights

By:
JOHN L. WODATCH, Chief
JEANINE WORDEN, Deputy Chief
MARY LOU MOBLEY, Senior Counsel
NAOMI MILTON, Supervisory Attorney
CAROLYN RUSSELL, Investigator
MICHELE ANTONIO MALLOZZI, Architect
U.S. Department of Justice
Civil Rights Division
950 Pennsylvania Avenue, N.W.
Disability Rights Section - NYA
Washington, DC 20530

Date:      9/27/04

Attachment A to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

NOTICE UNDER THE AMERICANS WITH DISABILITIES ACT

In accordance with the requirements of title II of the Americans with Disabilities Act of 1990, the City will not discriminate against qualified individuals with disabilities on the basis of disability in the City’s services, programs, or activities.

Employment: The City does not discriminate on the basis of disability in its hiring or employment practices and complies with all regulations promulgated by the U.S. Equal Employment Opportunity Commission under title I of the Americans with Disabilities Act (ADA).

Effective Communication: The City will generally, upon request, provide appropriate aids and services leading to effective communication for qualified persons with disabilities so they can participate equally in the City’s programs, services, and activities, including qualified sign language interpreters, documents in Braille, and other ways of making information and communications accessible to people who have speech, hearing, or vision impairments.

Modifications to Policies and Procedures: The City will make all reasonable modifications to policies and programs to ensure that people with disabilities have an equal opportunity to enjoy all City programs, services, and activities. For example, individuals with service animals are welcomed in City offices, even where pets are generally prohibited.

Anyone who requires an auxiliary aid or service for effective communication, or a modification of policies or procedures to participate in a City program, service, or activity, should contact [Insert name of ADA Coordinator and contact information] as soon as possible but no later than 48 hours before the scheduled event.

The ADA does not require the City to take any action that would fundamentally alter the nature of its programs or services, or impose an undue financial or administrative burden.

Complaints that a City program, service, or activity is not accessible to persons with disabilities should be directed to [Insert name of ADA Coordinator and contact information]

The City will not place a surcharge on a particular individual with a disability or any group of individuals with disabilities to cover the cost of providing auxiliary aids/services or reasonable modifications of policy, such as retrieving items from locations that are open to the public but are not accessible to persons who use wheelchairs.

(Return to Agreement)

Attachment B to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

The City of Gallup

Grievance Procedure under The Americans with Disabilities Act

This Grievance Procedure is established to meet the requirements of the Americans with Disabilities Act of 1990. It may be used by anyone who wishes to file a complaint alleging discrimination on the basis of disability in the provision of services, activities, programs, or benefits by the City. The City’s Personnel Policy governs employment-related complaints of disability discrimination.

The complaint should be in writing and contain information about the alleged discrimination such as the name, address, phone number of the complainant and location, date, and description of the problem. Alternative means of filing complaints, such as personal interviews or a tape recording of the complaint, will be made available for persons with disabilities upon request.

The complaint should be submitted by the grievant and/or his/her designee as soon as possible but no later than 60 calendar days after the alleged violation to:

[Insert name of ADA Coordinator and contact information]

Within 15 calendar days after receipt of the complaint, [name of ADA Coordinator] or [his/her] designee will meet with the complainant to discuss the complaint and the possible resolutions. Within 15 calendar days of the meeting, [name of ADA Coordinator] or [his/her] designee will respond in writing, and where appropriate, in format accessible to the complainant, such as large print, Braille, or audio tape. The response will explain the position of the City and offer options for substantive resolution of the complaint.

If the response by [name of ADA Coordinator] or [his/her] designee does not satisfactorily resolve the issue, the complainant and/or his/her designee may appeal the decision of within 15 calendar days after receipt of the response to the [City Manager] or [his/her] designee.

Within 15 calendar days after receipt of the appeal, the [City Manager] or [his/her] designee will meet with the complainant to discuss the complaint and possible resolutions. Within 15 calendar days after the meeting, the [City Manager] or [his/her] designee will respond in writing, and, where appropriate, in a format accessible to the complainant, with a final resolution of the complaint.

All written complaints received by [name of ADA Coordinator] or [his/her] designee, appeals to the [City Manager] or [his/her] designee , and responses from these two offices will be retained by the City for at least three years.

(Return to Agreement)

Attachment C to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

CITY OF GALLUP POLICE DEPARTMENT POLICY STATEMENT REGARDING

EFFECTIVE COMMUNICATION WITH PEOPLE WHO ARE DEAF OR HARD OF HEARING

OVERVIEW

It is the policy of this law enforcement agency (Agency) to ensure that a consistently high level of service is provided to all community members, including those who are deaf or hard of hearing. This Agency has specific legal obligations under the Americans with Disabilities Act and the Rehabilitation Act. To carry out these policies and legal obligations, the Agency instructs its officers and employees as follows:

People who identify themselves as deaf or hard of hearing are entitled to a level of service equivalent to that provided hearing persons.

The Agency will make every effort to ensure that its officers and employees communicate effectively with people who have identified themselves as deaf or hard of hearing.

Effective communication with a person who is deaf or hard of hearing involved in an incident – whether as a victim, witness, suspect, or arrestee – is essential in ascertaining what actually occurred, the urgency of the matter, and type of situation.

Various types of communication aids – known as “auxiliary aids and services” – are used to communicate with people who are deaf or hard of hearing. These include use of gestures or visual aids to supplement oral communication; an exchange of written notes; use of a computer or typewriter; use of assistive listening devices (to amplify sound for persons who are hard of hearing); or use of qualified oral or sign language interpreters.

The type of aid that will be required for effective communication will depend on the individual’s usual method of communication, and the nature, importance, and duration of the communication at issue.

In many circumstances, oral communication supplemented by gestures and visual aids, an exchange of written notes, use of a computer or typewriter, or use of an assistive listening device may be effective. In other circumstances, qualified sign language or oral interpreters are needed to communicate effectively with persons who are deaf or hard of hearing. The more lengthy, complex, and important the communication, the more likely it is that a qualified interpreter will be required for effective communication with a person whose primary means of communication is sign language or speech reading. For example:

– If there has been an incident and the officer is conducting witness interviews, a qualified sign language interpreter may be required to communicate effectively with someone whose primary means of communication is sign language.

– If a person is asking an officer for directions to a location, gestures and an exchange of written notes will likely be sufficient to communicate effectively and a sign language interpreter is often not required.

To serve each individual effectively, primary consideration should be given to the communication aid or service that works best for that person. Officers must ask persons who are deaf or hard of hearing what type of auxiliary aid or service they need. Officers must defer to those expressed choices, unless there is another equally effective way of communicating, given the circumstances, length, complexity, and importance of the communication, as well as the communication skills of the person who is deaf or hard of hearing.

The Agency is not required to provide a particular auxiliary aid or service if doing so would fundamentally alter the nature of the law enforcement activity in question, or if it would cause an undue administrative or financial burden. Only the Agency head or his or her designee may make this determination. For example:

– If the Agency has limited financial resources and providing a particular auxiliary aid would cost a large sum of money, the Agency head may determine that it would be an undue financial burden (note: the Agency’s budget as a whole must be considered). In this situation, the most effective means of communication that does not involve an undue burden must be used.

The input of people who are deaf or hard of hearing who are involved in incidents is just as important to the law enforcement process as the input of others. Officers must not draw conclusions about incidents unless they fully understand – and are understood by – all those involved, including persons who are deaf or hard of hearing.

People who are deaf or hard of hearing must never be charged for the cost of an auxiliary aid or service needed for effective communication.

ON-CALL INTERPRETIVE SERVICES

The Agency will maintain a list of sign language and oral interpreting services that are available (on-call 24 hours per day) and willing to provide qualified interpreters as needed. Each of these services will be chosen after having been screened for the quality and skill of its interpreters, its reliability, and other factors such as cost. The Agency will update this list annually.

A qualified sign language or oral interpreter is one who is able to interpret effectively, accurately, and impartially, both receptively and expressively, using any necessary specialized vocabulary. Accordingly, an interpreter must be able to sign to the deaf individual (or interpret orally to the person who does not use sign language) what is being said by the hearing person and to voice to the hearing person what is being signed or said by the deaf individual. The interpreter must be able to interpret in the language the deaf person uses (e.g., American Sign Language or Signed English) and must be familiar with law enforcement terms and phrases. Because a qualified interpreter must be able to interpret impartially, a family member, child, or friend of the individual who is deaf may not be qualified to render the necessary interpretation because of factors such as professional, emotional, or personal involvement, or considerations of confidentiality. Additionally, although a “qualified” interpreter may be certified, a certified interpreter is not necessarily “qualified,” if he or she is not a good communications match for the deaf person (e.g., where the deaf person uses Signed English and the interpreter uses American Sign Language) or the situation (e.g., where the interpreter is unfamiliar with law enforcement vocabulary). Certification is not required in order for an interpreter to be “qualified.”

TTY AND RELAY SERVICES

In situations when a nondisabled person would have access to a telephone, officers must provide persons who are deaf or hard of hearing the opportunity to place calls using a text telephone (TTY, also known as a telecommunications device for deaf people, or TDD). Officers must also accept telephone calls placed by persons who are deaf or hard of hearing through the Telecommunications Relay Service.

TECHNIQUES FOR OFFICERS TO COMMUNICATE EFFECTIVELY

Officers must review and have a working knowledge of Guide for Law Enforcement Officers When In Contact With People Who Are Deaf or Hard of Hearing. This document reviews how officers should communicate effectively in the types of situations officers will encounter. These situations include:

– Issuing a noncriminal or motor vehicle citation.
– Communicating with a person who initiates contact with an officer.
– Interviewing a victim or critical witness to an incident.
– Questioning a person who is a suspect in a crime.
– Making an arrest or taking a person into custody.
– Issuing Miranda Warnings to a person under arrest or in custody.
– Interrogating a person under arrest or in custody.

PROCEDURES FOR OBTAINING AUXILIARY AIDS AND SERVICES

Officers must utilize the following auxiliary aids, when available, to communicate effectively:

– Use of gestures
– Use of visual aids
– Exchange of written notes
– Use of computers or typewriters
– Use of assistive listening devices
– Use of teletypewriters (TTY’s)
– Use of qualified oral or sign language interpreters

(Return to Agreement)

Attachment D to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

GUIDE FOR LAW ENFORCEMENT OFFICERS

When In Contact With People Who Are Deaf or Hard of Hearing

As a law enforcement officer, you can expect to come into contact with people who are deaf or hard of hearing.

Title II of the Americans with Disabilities Act (ADA) of 1990 prohibits State and local government from discriminating against an individual with a disability. Municipal and State police and county sheriff departments are bound by this Federal law. Your office has adopted a more detailed policy regarding law enforcement officers’ communication with people who are deaf or hard of hearing. You should become familiar with this policy.

What does title II require of you when interacting with persons who are deaf or hard of hearing? Among other things, your communication with such an individual must be as effective as your communication with hearing people.

How do you communicate? Provide aids or services as necessary to ensure that the deaf or hard of hearing individual understands what you are saying and that you understand him or her. These can include:

– use of qualified sign language or oral interpreters
– for people who are hard of hearing, speaking loudly and clearly, and use of assistive listening devices (to amplify sound)
– use of gestures or visual aids to supplement oral communication
– an exchange of written notes
– or use of a computer or typewriter.

What method of communication should you use? The law requires you to give primary consideration to the individual’s preference. Ask how the person wishes to communicate.

For example, some people who are deaf do not use sign language and may need to use a different aid or rely on lipreading. In one-on-one communication with an individual who lip reads, an officer should face the individual directly, and should ensure that the communication takes place in a well-lighted area.

Honor the individual’s choice unless it would significantly interfere with your law enforcement responsibilities or you are confident that other means of communicating, that may be easier to provide, are just as effective. Remember that deaf or hard of hearing persons must be able to understand you as well as those who do not have hearing impairments.

DO NOT ask a family member or friend to interpret for a deaf individual unless it is urgent to communicate immediately and that is the only option. If the deaf person requests that arrangement and the other person agrees, however, you can proceed.

How do you know when you are communicating clearly to an individual who is deaf or hard of hearing? Ask the person to summarize what you are saying. Test his or her understanding.

If the person uses sign language, what kinds of communication require an interpreter? Consider the length, importance, and complexity of the communication, as well as the context.

– In a simple encounter, such as checking a driver’s license or giving directions, a notepad and pencil or perhaps gestures will normally be sufficient.

– During interrogations and arrests, a sign language interpreter will often be necessary.

– If the legality of a conversation will be questioned in court, such as where Miranda warnings are issued, a sign language interpreter may be necessary. You should be careful about misunderstandings in the absence of a qualified interpreter. A nod of the head may be an attempt to appear cooperative in the midst of misunderstanding, rather than consent or a confession of wrongdoing.

– In general, if an individual who does not have a hearing disability would be subject to police action without interrogation, then an interpreter will not be required, unless one is necessary to explain the action being taken.

Example: An officer clocks a car on the highway driving 15 miles above the speed limit. The driver, who is deaf, is pulled over and issued a noncriminal citation. The individual is able to understand the reasons for the citation, because the officer exchanges notes and points to information on the citation. A sign language interpreter is not needed.

Example: An officer responds to an aggravated battery call and upon arriving at the scene observes a bleeding victim and an individual holding a weapon. Eyewitnesses observed the individual strike the victim. The individual with the weapon is deaf, but the officer has probable cause to make a felony arrest without an interrogation. An interpreter is not necessary to carry out the arrest.

Example: An officer responds to the scene of a domestic disturbance. The husband says the wife has been beating their children and he has been trying to restrain her. The wife, who is deaf, requests an interpreter. The officer begins by exchanging notes but the woman’s responses indicate a lack of comprehension and poor grammar. An interpreter is necessary to carry out any arrest. In this situation, it would be inappropriate to use a family member to assist with communication, even if it is offered.

Do you have to take a sign language interpreter to a call about a violent crime in progress or a similar urgent situation involving a person who is deaf? No. An officer's immediate priority is to stabilize the situation. If the person being arrested is deaf, the officer can make an arrest and call for an interpreter to be available later at the booking station.

Contact numbers for your local sign language interpreters:





(Return to Agreement)

Attachment E to Settlement Agreement between the United States of America and
Gallup , New Mexico DJ# 204-49-77

Pursuant to paragraph 24 of the Agreement, within one month of the effective date of this Agreement, the City will request in writing that each of the owners and operators of the polling places listed below will remove the noted barriers to access for persons with disabilities and the City will distribute to them the Department’s ADA Checklist for Polling Places (www.ada.gov/votingck.htm). The request will specify that the remediation be completed within one year of the effective date of this Agreement. The City will simultaneously send a courtesy copy of the request to the Department:

1. Jefferson Elementary (300 Mollica Drive):

a. Although the parking lot has a total of 52 parking spaces, an inadequate number are designated as reserved for people with disabilities, there are no access aisles, and no van-accessible signage. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space and 2 standard spaces designated as reserved for people with disabilities. Standard accessible spaces shall be a minimum of 96 inches wide and served by access aisles at least 60 inches wide. The van accessible space shall be a minimum of 96 inches wide and served by an access aisle at least 96 inches wide. All spaces designated as reserved for people with disabilities shall have vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. The van accessible space shall have an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

2. Washington Elementary School (700 West Wilson):

a. The parking reserved for persons with disabilities lacks appropriate signage. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Standards §§ 4.6.4, 4.30.7(1).

3. Gallup Middle School (1001 South Grandview):

a. Although the parking lot has a number of parking spaces, the spaces are not clearly designated and none are reserved for persons with disabilities. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space designated as reserved for people with disabilities. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. There is a 1 inch high lip at the low end of the curb cut along the route from the parking area to the gym. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

4. Red Rock Elementary School (1305 Red Rock):

a. Although 3 of the 26 parking spaces are reserved for persons with disabilities, there are no access aisles or van-accessible signage. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space and 2 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. Each leaf of the double-leaf doors at the entrance to the gym is provides only 30 inches of clear opening width. Provide a designated accessible entrance that has at least one active leaf with a minimum 32 inch clear opening width with the door open 90 degrees, measured between the face of the door and the opposite stop; that has either an automatic door operator or clear and level maneuvering clearance that complies fully with Fig. 25; and that has a threshold not exceeding 1/2 inch in height and beveled with a slope no greater than 1:2. Ensure that all hardware and operating devices have shapes that are easy to grasp with one hand and do not require tight grasping, pinching, or twisting of the wrist to operate, and that they are mounted no higher than 48 inches above the finished floor. Standards §§ 4.1.3(7)(a), 4.1.6(1)(b), 4.13, Figs. 24, 25.

5. Juan de Onate Elementary School (505 E. Vega):

a. Although 2 of the 29 parking spaces are reserved for persons with disabilities, there are no access aisles or van-accessible signage and one of the spaces is not level due to the encroachment of a built-up curb ramp in the parking space. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that the van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Provide a curb ramp located so that it does not project into this element and all aspects of the ramp or curb cut comply with the Standards. Standards §§ 4.1.2(5), 4.3.8, 4.6, 4.7.6, 4.30.7(1).

b. The placement of the built-up curb ramp in a parking space would allow a parked vehicle to block access to the ramp; under those circumstances, there would be no accessible route to the area used for voting. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

6. Roosevelt Elementary School (400 E. Logan):

a. Although the parking lot at the side of the school has a total of 28 parking spaces, none are provided for persons with disabilities. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. There are no handrail extensions at the bottom of the ramp. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter such that the inside handrail is continuous and both handrails have a continuous gripping surface along both sides of the ramp extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface; the handrails do not rotate within their fittings; and both handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post. Standards § 4.8.5.

7. Rocky View Elementary School (345 Basilio Drive):

a. Although the parking lot has a total of 54 parking spaces, an inadequate number are designated as reserved for people with disabilities, and there is no van accessible sign. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 2 standard spaces designated as reserved for people with disabilities. Standard accessible spaces shall be a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Van accessible spaces shall be a minimum of 96 inches wide and served by access aisles at least 96 inches wide. All spaces designated as reserved for people with disabilities shall have vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. Van accessible spaces shall have an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

8. Stagecoach Elementary School (725 Freedom Drive):

a. Although the parking lot has a total of 121 parking spaces, none is designated as “van accessible,” there is no vertical signage, and there are no access aisles. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space and 4 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

9. Lincoln Elementary School (801 W. Hill):

a. Although the parking lot has a total of 28 parking spaces, there are no access aisles, no vertical signage reserving spaces for persons with disabilities, and no “van-accessible” signage. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

10. J. F. K. Middle School (600 Boardman):

a. Although the parking lot has a total of 76 parking spaces, an inadequate number are designated as reserved for people with disabilities, there are no access aisles, and there is no vertical signage. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 3 standard spaces designated as reserved for people with disabilities. Standard accessible spaces shall be a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Van accessible spaces shall be a minimum of 96 inches wide and served by access aisles at least 96 inches wide. All spaces designated as reserved for people with disabilities shall have vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. Van accessible spaces shall have an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

(Return to Agreement)

Attachment H to Settlement Agreement between the United States of America and
Gallup , New Mexico DJ# 204-49-77

Newly Constructed Facilities: In order to ensure that the spaces and elements in City facilities for which construction was, or will be commenced after January 26, 1992, are readily accessible to and usable by persons with disabilities, the City will take the following actions:

1. Northside Fire Station: The City has provided the Department with a complete set of construction documents including all contract drawings and construction project manuals for review. The Department is reviewing these documents for compliance with the ADA. Upon completion of this review, the Department will notify the City of any modifications needed to bring the facility into full compliance with the ADA. The City shall complete such modifications during the normal course of construction or within 3 months of receiving the Department’s notification, whichever is earlier.

(Return to Agreement)

Attachment I to Settlement Agreement between the United States of America and
Gallup , New Mexico DJ# 204-49-77

Please note: Paragraph 53 of the Agreement requires that within three months of the effective date of the Agreement, the City will install signage as necessary to comply with 28 C.F.R. § 35.163(b), after having surveyed all facilities that are the subject of this Agreement for the purpose of identifying those that have multiple entrances not all of which are accessible.

Program Access in Existing City Facilities: In order to ensure that each of the City’s programs, services, and activities operating at a facility that is the subject of this Agreement, when viewed in its entirety, is readily accessible to and usable by persons with mobility impairments, the City will take the following actions:

1. Within 12 months of the effective date of this Agreement, the City will complete the following to the Parking Lot, located at First and Aztec Streets:

a. This parking lot has 46 spaces, 1 of which is designated as reserved for persons with disabilities. The sign at the designated space is mounted too low to the ground; there is no access aisle; there is no accessible route that is not in a lane of traffic; and the route for the general public from the parking lot to the sidewalk includes 4 steps. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1). Alternatively, propose and, upon receiving approval, implement a program access solution.

2. Within 24 months of the effective date of this Agreement, the City will complete the following to the Gallup Rex Museum:

a. There is no level landing at the entry door. Provide a floor or ground area within the required clearances which is level and clear. Standards §§ 4.1.3(7)(a), 4.13.6, Fig. 25.

b. The interior ramp has a slope that exceeds 1:12 and lacks handrails. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.1.2(1), 4.1.2(2), 4.3.8, 4.8.

c. Drinking Fountain.

i. The drinking fountain is not accessible to persons who have difficulty bending or stooping. Provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser, or by such other means as would achieve the required accessibility for each group of people. Standards §§ 4.1.3(10)(a).

ii. The drinking fountain is a protruding object that is not cane-detectable. Provide a drinking fountain at this location such that its bottom leading edges measure no more than 27 inches above the finished floor or protrude no more than 4 inches into the walkway. Standards §§ 4.1.2(3), 4.4.

d. Men’s Toilet Room with Stalls

i. There room signage has no accessible features. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. Although there are 2 lavatories – one higher and one lower – neither is accessible to persons with disabilities. Provide a lavatory with the top of its rim or counter 34 inches or less above the finished floor; the bottom edge of the apron at least 29 inches above the finished floor; knee and toe clearances that comply with Fig. 31; hot water and drain pipes covered or otherwise configured to protect against contact; clear floor space at least 30 inches wide and 48 inches deep centered on the lavatory; and a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.1.3(11), 4.22.6, 4.19.2, 4.19.3, 4.19.4, 4.19.5, 4.27.4, Figs. 31, 32.

iii. No toilet stall is accessible to persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22.4, 4.22.7, 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

e. Women’s Toilet Room with Stalls

i. There room signage has no accessible features. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. Although there are 2 lavatories – one higher and one lower – neither is accessible to persons with disabilities. Provide a lavatory with the top of its rim or counter 34 inches or less above the finished floor; the bottom edge of the apron at least 29 inches above the finished floor; knee and toe clearances that comply with Fig. 31; hot water and drain pipes covered or otherwise configured to protect against contact; clear floor space at least 30 inches wide and 48 inches deep centered on the lavatory; and a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.1.3(11), 4.22.6, 4.19.2, 4.19.3, 4.19.4, 4.19.5, 4.27.4, Figs. 31, 32.

iii. Although there are three toilet stalls, none is accessible to persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22.4, 4.22.7, 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

3. Within 12 months of the effective date of this Agreement, the City will complete the following to the Fire Department #1:

a. Although 1 of the 29 parking spaces is reserved for persons with disabilities, there is no access aisle and no “van-accessible” signage. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. Men’s Single User Toilet Room

i. The room sign lacks the International Symbol of Accessibility. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door has knob hardware. Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. Standards §§ 4.1.3(7)(b), 4.13.9.

iii. There is no accessible mirror provided. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.6, 4.19.6.

iv. The paper towel dispenser is 65 inches above the finished floor. Provide a paper towel dispenser with the controls a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.1.3(13), 4.27.2, 4.27.3, 4.2.4, 4.2.5, 4.2.6.

v. The lavatory hot water and drain pipes are not wrapped or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards §§ 4.1.3(11), 4.22.6, 4.19.4.

vi. The side grab bar is mounted 29 inches above the finished floor, and the space between the wall and the side grab bar is 2-1/2 inches. Provide a side grab bar that is at least 42 inches in overall length, with the far end mounted at least 54 inches from the rear wall and the closer end 12 inches or less from the rear wall; mounted 33 to 36 inches above the finished floor; with a diameter between 1 1/4 and 1 1/2 inches; with 1 1/2 inches between the grab bar and the wall; and at least 1 1/2 inches between the grab bar and any other object, such as the toilet paper dispenser. Standards §§ 4.1.3(11), 4.22.4, 4.16.4, 4.26.2, Fig. 29.

vii. The rear grab bar is too short. Provide a rear grab bar that is at least 36 inches in overall length with the closer end no more than 6 inches from the side wall. Standards §§ 4.1.3(11), 4.22.4, 4.16.4, Fig. 29.

c. Women’s Single User Toilet Room

i. The room sign lacks the International Symbol of Accessibility. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door has knob hardware. Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. Standards §§ 4.1.3(7)(b), 4.13.9.

iii. There is no accessible mirror provided. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.6, 4.19.6.

iv. The paper towel dispenser is 65 inches above the finished floor. Provide a paper towel dispenser with the controls a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.1.3(13), 4.27.2, 4.27.3, 4.2.4, 4.2.5, 4.2.6.

v. The lavatory hot water and drain pipes are not wrapped or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards §§ 4.1.3(11), 4.22.6, 4.19.4.

vi. The side grab bar is too short, it is mounted 29 inches above the finished floor, and the space between the wall and the side grab bar is 2-1/2 inches. Provide a side grab bar that is at least 42 inches in overall length, with the far end mounted at least 54 inches from the rear wall and the closer end 12 inches or less from the rear wall; mounted 33 to 36 inches above the finished floor; with a diameter between 1 1/4 and 1 1/2 inches; with 1 1/2 inches between the grab bar and the wall; and at least 1 1/2 inches between the grab bar and any other object, such as the toilet paper dispenser. Standards §§ 4.1.3(11), 4.22.4, 4.16.4, 4.26.2, Fig. 29.

vii. The rear grab bar is too short. Provide a rear grab bar that is at least 36 inches in overall length with the closer end no more than 6 inches from the side wall. Standards §§ 4.1.3(11), 4.22.4, 4.16.4, Fig. 29.

d. The drinking fountain is not accessible to persons who have difficulty bending or stooping. Provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser, or by such other means as would achieve the required accessibility for each group of people. Standards §§ 4.1.3(10)(a).

4. Within 12 months of the effective date of this Agreement, the City will complete the following to the Gallup Cultural Center:

a. Parking

i. There are 2 parking lots. In the left lot, 2 of the 80 spaces are reserved for persons with disabilities. In the right lot, 6 of the 65 spaces are reserved for persons with disabilities. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 4 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. Train Station

i. There is a fold-down section of the ticketing counter for persons who use wheelchairs, but unless it is in the “down” position, it is indistinguishable from the rest of the high counter. Provide signage indicating its availability.

ii. The drinking fountain near the entrance to the Café is not accessible to persons who have difficulty bending or stooping, and the door to the café swings into the required clear floor space at the drinking fountain. Provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser, or by such other means as would achieve the required accessibility for each group of people. Standards § 4.1.3(10)(a). Also, ensure that no door swings into the required clear floor space at any accessible fixture.

iii. The door to the Café from the train station requires too much pressure to operate. Provide a door that requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

iv. The door to the toilet room vestibule from the Café requires too much pressure to operate. Provide a door that requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

v. The center exterior entrance to the museum is not accessible because it contains a step. Provide accessible directional signage with the International Symbol of Accessibility at this entrance indicating the location of the nearest accessible entrance, and provide accessible signage with the International Symbol of Accessibility at all accessible entrances. Standards §§ 4.1.2(7)(c), 4.30.1, 4.30.2, 4.30.3, 4.30.5, 4.30.7.

c. The panic strike on the main exterior entrance door from the museum does not release when the automatic door opener button is engaged, keeping the door from opening. Repair or adjust accordingly.

d. Men’s Toilet Room with Stalls - 1st Floor

i. There is a compliant sign in the hallway, but no compliant sign for the individual toilet room. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door requires too much pressure to operate. Provide a door that requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

iii. Stall for persons with disabilities.

(1) The flush control is on the closed side. Provide a flush control mounted on the “open” side of the toilet’s clear floor space; 44 inches or less above the finished floor; and requiring a maximum of 5 pounds of force to operate; or provide an automatic flush device. Standards §§ 4.16.5, 4.17.2, 4.27.4.

(2) The coat hook is inaccessible. Provide a coat hook at a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.25.2, 4.25.3, 4.2.4, 4.2.5, 4.2.6.

(3) The toilet dispenser is located on wrong side of the stall. Provide a toilet paper dispenser that is mounted with its top at least 1 1/2 inches under the side grab bar and 36 inches or less from the rear wall and is centered at least 19 inches above the finished floor. Standards § 4.17.3, Fig. 30(d).

e. Women’s Toilet Room with Stalls - 1st Floor

i. There is a compliant sign in the hallway, but no compliant sign for the individual toilet room. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door requires too much pressure to operate. Provide a door that requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

f. Men’s and Women’s Toilet Rooms with Stalls - 2d floor

i. There is no accessible signage. For each, provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

5. Within 12 months of the effective date of this Agreement, the City will complete the following to the Tony Esparza Memorial Park:

a. The entrance into the playground is only 24 inches wide. Provide an accessible route into the playground with a minimum clear width of 36 inches, except at doors or gates, where the width may decrease to 32 inches. Standards §§ 4.3.3, 4.13.5.

b. There is no accessible route to the playground or any play equipment. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

c. None of the play equipment is usable by children with disabilities. Ensure program access by providing at least one piece of play equipment that is on an accessible route and has a transfer platform to enable children who use wheelchairs to use it.

6. Within12 months of the effective date of this Agreement, the City will complete the following to the Golden Age Park:

a. Although 1 of the 10 parking spaces is designated for persons with disabilities, there is no “van-accessible” signage; the signage that is provided is improperly located so as not to give notice of the specific space that is reserved; and there is no demarcated access aisle. On the shortest accessible route to the accessible entrance, provide 1 van accessible space designated as reserved for people with disabilities. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. There is no accessible route between the entry gate and the concrete pathway inside the park, or to the barbeque grills. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

7. Within 48 months of the effective date of this Agreement, the City will complete the following to the City Golf Course:

a. Although 3 of the parking spaces are designated for persons with disabilities, the signage is too low and may be obstructed by parked vehicles; there are no access aisles; no space is designated as “van-accessible;” and the parking spaces are not level. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 2 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. The ramp from the parking lot greatly exceeds the maximum allowable slope; there is inadequate edge protection on the “parking” side of the ramp; there are no handrails on the “parking” side of the ramp; there is no level landing at the top; there are no handrail extensions; and the ends of the handrails do not return smoothly. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.3.8, 4.8.

c. Exterior Entrance and Doors

i. There is no level landing or automatic door opener at the entrance. Provide a door so that the floor or ground area within the required clearances is level and clear, or provide an automatic door opener. Standards § 4.13.6, Fig. 25.

ii. The built-up curb ramp does not have flared sides. Provide appropriately flared sides. Standards § 4.7.5.

iii. The route from the Pro Shop to the golf course is over loose crushed stone. Provide at least one accessible route within the boundary of the site connecting these elements that has a surface that is firm, stable, and slip resistant. Standards §§ 4.3, 4.5, Fig. 7.

d. Men’s Toilet Room with Stalls

i. There room signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door provides a clear opening width of only 30 inches and has knob hardware. Provide a door with a clear opening at least 32 inches wide when measured from the face of the door to the opposite stop when the door is opened 90 degrees and with hardware usable with one hand and without tight grasping, pinching, or twisting of the wrist. Lever-operated, push-type, and U-shaped handles are acceptable designs. Standards §§ 4.13.5, 4.13.9.

iii. There is no toilet stall for persons with disabilities. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

iv. The cabinet-style lavatory is not accessible to persons with disabilities. Provide a lavatory with the top of its rim or counter 34 inches or less above the finished floor; the bottom edge of the apron at least 29 inches above the finished floor; knee and toe clearances that comply with Fig. 31; hot water and drain pipes covered or otherwise configured to protect against contact; clear floor space at least 30 inches wide and 48 inches deep centered on the lavatory; and a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.19.2, 4.19.3, 4.19.4, 4.19.5, 4.27.4, Figs. 31, 32.

v. The mirror is inaccessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards § 4.19.6.

e. Women’s Toilet Room with Stalls

i. The room signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door provides a clear opening width of only 30 inches and has knob hardware. Provide a door with a clear opening at least 32 inches wide when measured from the face of the door to the opposite stop when the door is opened 90 degrees and with hardware usable with one hand and without tight grasping, pinching, or twisting of the wrist. Lever-operated, push-type, and U-shaped handles are acceptable designs. Standards §§ 4.13.5, 4.13.9.

iii. There is no toilet stall for persons with disabilities. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

iv. The cabinet-style lavatory is not accessible to persons with disabilities. Provide a lavatory with the top of its rim or counter 34 inches or less above the finished floor; the bottom edge of the apron at least 29 inches above the finished floor; knee and toe clearances that comply with Fig. 31; hot water and drain pipes covered or otherwise configured to protect against contact; clear floor space at least 30 inches wide and 48 inches deep centered on the lavatory; and a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.19.2, 4.19.3, 4.19.4, 4.19.5, 4.27.4, Figs. 31, 32.

v. The mirror is inaccessible. Provide a lavatory with the top of its rim or counter 34 inches or less above the finished floor; the bottom edge of the apron at least 29 inches above the finished floor; knee and toe clearances that comply with Fig. 31; hot water and drain pipes covered or otherwise configured to protect against contact; clear floor space at least 30 inches wide and 48 inches deep centered on the lavatory; and a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.19.2, 4.19.3, 4.19.4, 4.19.5, 4.27.4, Figs. 31, 32.

8. Within 12 months of the effective date of this Agreement, the City will complete the following to the Aileen Roat Park:

a. None of the 34 parking spaces are reserved for persons with disabilities. On the shortest accessible route to the accessible entrance, provide 1 an accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. There is no accessible route to the tables in park because the built-up curb ramp is too narrow and the transition between the blacktop and built-up ramp is too high and not beveled. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

c. The covered picnic tables are not accessible. Provide at least one picnic table on an accessible route such that there is knee space at the table at least 27 inches high, 30 inches wide, and 19 inches deep, and such that the height of the top of the table is between 28 inches and 34 inches above the ground. Standards §§ 4.32.3, 4.32.4.

d. The route to the tennis court is missing edge protection on one side and, because it is sufficiently sloped as to qualify as a ramp, it needs handrails and a level landing at the top. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.3.8, 4.8.

9. Within 12 months of the effective date of this Agreement, the City will complete the following to the Veterans Memorial Park:

a. Although 9 of the 148 parking spaces are designated for persons with disabilities, there are no access aisles, there are no vertical signs with symbols of access, there is no “van-accessible” signage, and the pavement markings are not clear. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 4 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. Accessible Route

i. There is no accessible route to any of the ball fields and there are no curb cuts from the parking to the field stands. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

c. Men’s Toilet Room with Stalls at Baseball Field #1

i. The room signage is inaccessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. There is inadequate turning space in the toilet room. Provide an unobstructed turning space at least 60 inches in diameter or a T-shaped space complying with Fig. 3(b). Standards §§ 4.22.3, 4.2.3, Fig. 3.

iii. The paper towel dispenser is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

iv. Toilet Stall for Persons with Disabilities

(1) The flush control is on the closed side. Provide a flush control mounted on the “open” side of the toilet’s clear floor space; 44 inches or less above the finished floor; and requiring a maximum of 5 pounds of force to operate; or provide an automatic flush device. Standards §§ 4.16.5, 4.17.2, 4.27.4.

(2) The toilet paper dispenser is located too far from the rear wall. Provide a toilet paper dispenser that is mounted with its top at least 1 1/2 inches under the side grab bar and 36 inches or less from the rear wall and is centered at least 19 inches above the finished floor. Standards § 4.17.3, Fig. 30(d).

d. Women’s Toilet Room with Stalls at Baseball Field 1

i. There room signage is inaccessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. There is inadequate turning space in the toilet room. Provide an unobstructed turning space at least 60 inches in diameter or a T-shaped space complying with Fig. 3(b). Standards §§ 4.22.3, 4.2.3, Fig. 3.

iii. The paper towel dispenser is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

iv. Toilet Stall for Persons with Disabilities

(1) The flush control is on the closed side. Provide a flush control mounted on the “open” side of the toilet’s clear floor space; 44 inches or less above the finished floor; and requiring a maximum of 5 pounds of force to operate; or provide an automatic flush device. Standards §§ 4.16.5, 4.17.2, 4.27.4.

(2) The coat hook is inaccessible. Provide a coat hook at a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.25.2, 4.25.3, 4.2.4, 4.2.5, 4.2.6.

e. Baseball Fields 1 and 2

i. The bleachers do not have any spaces for persons who use wheelchairs and there is no accessible route to the seating. Provide the number of wheelchair seating areas required by table 4.1.3(19)(a), each with a minimum clear ground or floor space of 66 inches wide by 48 inches deep for forward or rear access, or 66 inches wide by 60 inches deep for side access. Ensure that the ground or floor at all wheelchair locations is level, firm, stable, and slip resistant; that wheelchair seating areas are an integral part of the fixed seating plan and are located so as to provide people with physical disabilities a choice of admission prices and lines of sight comparable to those available for members of the general public; that wheelchair seating areas adjoin an accessible route that also serves as a means of egress in case of emergency; and that at least one fixed companion seat is provided next to each wheelchair seating area. Standards §§ 4.1.3(19)(a), 4.5, 4.33.

f. Men’s Single-User Toilet Room Near Girls’ Softball Field

i. The room signage contains the International Symbol of Accessibility, but it is mounted on the door and there is no raised or Braille lettering. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The centerline of the toilet is 20 inches from the side wall. Provide a toilet with a centerline that measures 18 inches from the near side wall. Standards § 4.16.2, Fig. 28.

iii. The paper towel dispenser is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

iv. The locking mechanism on the room door to ensure privacy requires tight pinching or grasping to operate. Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. Standards § 4.13.9.

g. Women’s Single-User Toilet Room Near Girls’ Softball Field

i. The room signage contains the International Symbol of Accessibility, but it is mounted on the door and there is no raised or Braille lettering. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The centerline of the toilet is 20 inches from the side wall. Provide a toilet with a centerline that measures 18 inches from the near side wall. Standards § 4.16.2, Fig. 28.

iii. The paper towel dispenser is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

iv. The locking mechanism on the room door to ensure privacy requires tight pinching or grasping to operate. Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. Standards § 4.13.9.

h. Snack Bar at Baseball Field 1

i. The counter height is 42 inches above the finished floor. Provide a counter on an accessible route such that a portion of the counter is at least 36 inches wide and no more than 36 inches above the finished floor. Standards §§ 7.2(1), 4.3.

i. Ramp to Picnic tables

i. The built-up curb ramp has no flared sides. Provide appropriately flared sides. Standards § 4.7.5.

ii. On the main ramp, there is no inside handrail and inadequate edge protection. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.3.8, 4.8.

j. Batting Cages

i. There is no accessible route to the batting cages. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

ii. There is a 4 inch change in level between the curb and the road. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

k. Toilet Room Building Near Playground and Volleyball Court

i. There is no accessible route to the building. Near the parking lot and the site entrance, provide directional signage with the International Symbol of Accessibility to the toilet rooms at the baseball fields and the girls’ softball fields. Standards §§ 4.1.2(7)(c), 4.30.1, 4.30.2, 4.30.3, 4.30.5, 4.30.7.

l. Volleyball Court

i. The ramp has no handrails. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Standards § 4.8.5.

ii. There are no wheelchair seating spaces at the bleachers. Provide the number of wheelchair seating areas required by table 4.1.3(19)(a), each with a minimum clear ground or floor space of 66 inches wide by 48 inches deep for forward or rear access, or 66 inches wide by 60 inches deep for side access. Ensure that the ground or floor at all wheelchair locations is level, firm, stable, and slip resistant; that wheelchair seating areas are an integral part of the fixed seating plan and are located so as to provide people with physical disabilities a choice of admission prices and lines of sight comparable to those available for members of the general public; that wheelchair seating areas adjoin an accessible route that also serves as a means of egress in case of emergency; and that at least one fixed companion seat is provided next to each wheelchair seating area. Standards §§ 4.1.3(19)(a), 4.5, 4.33.

m. Tennis and Basketball Courts

i. There is no accessible route to the tennis and basketball courts; they are up several steps. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

n. Playground

i. The slope of the lower ramp to the playground greatly exceeds the maximum allowable slope; the handrails do not extend at the top and bottom of the ramp and they do not return smoothly; and there is no level landing at the top. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.3.8, 4.8.

ii. The route between the upper and lower ramps to the playground is not firm, stable, and slip-resistant. Provide at least one accessible route within the boundary of the site that is firm, stable, and slip resistant. Standards §§ 4.3, 4.5, Fig. 7.

iii. None of the pieces of playground equipment are accessible to children with disabilities. Ensure program access by providing at least one piece of play equipment that is on an accessible route and has a transfer platform to enable children who use wheelchairs to use it.

10. Within 48 months of the effective date of this Agreement, the City will complete the following to the Fitness Center:

a. Although 2 of the 40 parking spaces are designated as standard spaces for persons with disabilities and one of them has a larger access aisle, there are no vertical signs; there is no “van-accessible” sign; and the pavement markings are not clear. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. Exterior Entrance and Doors

i. There are 2 sets of double leaf doors, creating a vestibule. The interior doors require 17 pounds of force to operate. The vestibule provides only 26 inches of clearance from the edge of the inside door when it is opened 90 degrees to the face of the exterior door. Provide a designated accessible entrance that has at least one active leaf with a minimum clear opening width of 32 inches with the door open 90 degrees, measured between the face of the door and the opposite stop; that has a minimum space between two hinged or pivoted doors of 48 inches plus the width of any door swinging into the space, with doors swinging in either the same direction or away from the space between the doors; that has either an automatic door operator or clear and level maneuvering clearance that complies fully with Fig. 25; and that has a threshold not exceeding 1/2 inch in height and beveled with a slope no greater than 1:2. Ensure that all hardware and operating devices have shapes that are easy to grasp with one hand and do not require tight grasping, pinching or twisting of the wrist to operate; and that they are mounted no higher than 48 inches above the finished floor. Standards § 4.13, Figs. 24, 25, 26. Additionally, provide an interior door that requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

c. The counter is 42 inches above the finished floor. Provide a counter on an accessible route such that a portion of the counter is at least 36 inches wide and no more than 36 inches above the finished floor. Standards §§ 7.2(1), 4.3.

d. Women’s Locker Room

i. Lavatories

(1) The hot water and drain pipes are not insulated or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards § 4.19.4.

(2) The faucet hardware is not accessible. Provide a lavatory with a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.19.5, 4.27.4.

ii. The fixed hair dryer is a protruding object. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

iii. Both hair dryers are beyond the acceptable reach ranges for persons with disabilities. Provide a hair dryer with the controls a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.27.2, 4.27.3, 4.2.4, 4.2.5, 4.2.6.

iv. The toilet stall that is designed for persons with disabilities is only 42 inches wide; it has a side grab bar that is only 24 inches long; the centerline of the toilet is 21 inches; the toilet paper dispenser is on the wrong side of the stall; and there is no rear grab bar. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

v. Showers

(1) The floor of the showers is 4 inches higher than the floor of the locker room and the vertical change in level is bridged by a 30 inch long ramp with an excessive slope. Provide at least one accessible route to the showers that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

(2) The shower controls and head are not accessible to persons with disabilities. Provide a shower in this room with grab bars, controls, a shower spray unit, and a seat, curb, and enclosure, if provided, that comply fully with the Standards and with Figs. 35, 36, and 37, as applicable. Standards § 4.21, Figs. 35, 36, 37.

vi. There are no accessible lockers. Provide a locker with mechanical controls, if any, that can be operated with 5 pounds of force or less and that can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards § 4.27.4.

vii. There are no accessible changing benches. Provide a 24 inch by 48 inch bench fixed to the wall along the bench’s longer dimension. Ensure that the bench has sufficient structural strength and is mounted with its surface between 17 inches and 19 inches above the finished floor. Provide clear floor space alongside the bench to allow a person using a wheelchair to make a parallel transfer onto the bench. Standards §§ 4.35.4, 4.26.3.

viii. The drinking fountain in the locker room is inaccessible to persons who have difficulty bending or stooping. Provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser, or by such other means as would achieve the required accessibility for each group of people. Standards § 4.1.3(10)(a).

e. Men’s Locker Room

i. Lavatories

(1) The hot water and drain pipes are not insulated or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards § 4.19.4.

(2) The faucet hardware is not accessible. Provide a lavatory with a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.19.5, 4.27.4.

ii. The fixed hair dryer is a protruding object. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

iii. Both hair dryers are beyond the acceptable reach ranges for persons with disabilities. Provide a hair dryer with the controls a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.27.2, 4.27.3, 4.2.4, 4.2.5, 4.2.6.

iv. The toilet stall that is designed for persons with disabilities is only 42 inches wide; it has a side grab bar that is only 24 inches long; the centerline of the toilet is 21 inches; and there is no rear grab bar. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

v. Showers

(1) The shower controls and head are not accessible to persons with disabilities. Provide a shower in this room with grab bars, controls, a shower spray unit, and a seat, curb, and enclosure, if provided, that comply fully with the Standards and with Figs. 35, 36, and 37, as applicable. Standards § 4.21, Figs. 35, 36, 37.

vi. There are no accessible lockers. Provide a locker with mechanical controls, if any, that can be operated with 5 pounds of force or less and that can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards § 4.27.4.

vii. There are no accessible changing benches. Provide a 24 inch by 48 inch bench fixed to the wall along the bench’s longer dimension. Ensure that the bench has sufficient structural strength and is mounted with its surface between 17 inches and 19 inches above the finished floor. Provide clear floor space alongside the bench to allow a person using a wheelchair to make a parallel transfer onto the bench. Standards §§ 4.35.4, 4.26.3.

viii. The drinking fountain in the locker room is inaccessible to persons who have difficulty bending or stooping. Provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser, or by such other means as would achieve the required accessibility for each group of people. Standards § 4.1.3(10)(a).

f. The door to the steam room provides only 24 inches of clear opening width. Provide a door with a clear opening of 32 inches with the door open 90 degrees, measured between the face of the door and the opposite stop. Standards § 4.13.5, Fig. 24.

11. Within 12 months of the effective date of this Agreement, the City will complete the following to the Annie Walker Memorial Park:

a. The picnic tables are not accessible. Provide at least one picnic table on an accessible route such that there is knee space at the table at least 27 inches high, 30 inches wide, and 19 inches deep, and such that the height of the top of the table is between 28 inches and 34 inches above the ground. Standards §§ 4.32.3, 4.32.4.

b. There is no accessible route to basketball court; it is up 10 steps. The main sidewalk has an area that is continually broken up due to wash-out. The route into the park for persons with disabilities greatly exceeds the length of the route for non-disabled persons and is overly circuitous. There is no accessible route to the playground equipment. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

12. Within 48 months of the effective date of this Agreement, the City will complete the following to the Red Rock State Park:

a. Convention Center

i. Although 6 of the 118 parking spaces are designated for persons with disabilities, they are too narrow; there are no access aisles; the pavement markings are not clear; and no space is designated as “van-accessible.” On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 4 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

ii. The entrance is comprised of two doors in series, creating a vestibule. The force required to operate the interior door is 14 pounds. Provide a designated accessible entrance that has at least one active leaf with a minimum clear opening width of 32 inches with the door open 90 degrees, measured between the face of the door and the opposite stop; that has a minimum space between two hinged or pivoted doors of 48 inches plus the width of any door swinging into the space, with doors swinging in either the same direction or away from the space between the doors; that has either an automatic door operator or clear and level maneuvering clearance that complies fully with Fig. 25; and that has a threshold not exceeding 1/2 inch in height and beveled with a slope no greater than 1:2. Ensure that all hardware and operating devices have shapes that are easy to grasp with one hand and do not require tight grasping, pinching or twisting of the wrist to operate; and that they are mounted no higher than 48 inches above the finished floor. Standards § 4.13, Figs. 24, 25, 26. Additionally, ensure that one of the interior doors requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

iii. The spout of the drinking fountain in the main lobby is 40 inches above the finished floor. Provide a fountain that has a spout height no higher than 36 inches, measured from the finished floor or ground surface to the spout outlet, and that otherwise complies with the Standards. Standards §§ 4.15, 4.27.4, Fig. 27.

iv. Men’s Toilet Room with Stalls - Main Lobby

(1) The signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

(2) There is inadequate space on the pull/ latch side of door, which requires a forward approach. On the pull side of the door, provide maneuvering clearance at least 60 inches deep and provide a minimum of 18 inches (24 inches is preferred) of maneuvering clearance on the latch side of the door. Standards § 4.13.6, Fig. 25(a).

(3) The mirror is inaccessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards § 4.19.6.

(4) The paper towel dispenser is 58 inches above the finished floor and it is a protruding object that is not cane-detectable. Provide a paper towel dispenser with the controls a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.27.2, 4.27.3, 4.2.4, 4.2.5, 4.2.6. Also, provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

(5) Although audible alarms are provided in the facility, there is no visual alarm in this room. Provide a visual alarm appliance in the toilet room. Standards §§ 4.28.1, 4.28.3.

(6) The outward-swinging door in the “alternate” toilet stall for ambulatory persons with disabilities is not self-closing. Provide at least one stall that is exactly 36 inches wide with an outward swinging, self-closing door and parallel grab bars complying with Fig 30(d). Standards §§ 4.22.4, Fig. 30(d).

(7) There is no toilet stall that is accessible to persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

v. Women’s Toilet Room with Stalls - Main Lobby

(1) The signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

(2) There is inadequate space on the pull/ latch side of door, which requires a forward approach. On the pull side of the door, provide maneuvering clearance at least 60 inches deep and provide a minimum of 18 inches (24 inches is preferred) of maneuvering clearance on the latch side of the door. Standards § 4.13.6, Fig. 25(a).

(3) The mirror is inaccessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards § 4.19.6.

(4) The paper towel dispenser is 58 inches above the finished floor and it is a protruding object that is not cane-detectable. Provide a paper towel dispenser with the controls a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.27.2, 4.27.3, 4.2.4, 4.2.5, 4.2.6. Also, provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

(5) Although audible alarms are provided in the facility, there is no visual alarm in this room. Provide a visual alarm appliance in the toilet room. Standards §§ 4.28.1, 4.28.3.

(6) The outward-swinging door in the “alternate” toilet stall for ambulatory persons with disabilities is not self-closing. Provide at least one stall that is exactly 36 inches wide with an outward swinging, self-closing door and parallel grab bars complying with Fig 30(d). Standards §§ 4.22.4, Fig. 30(d).

(7) There is no toilet stall that is accessible to persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

vi. Telephone - Lobby

(1) There is insufficient clear floor space and the highest operable part is at 62 inches. Provide an accessible telephone with a clear floor space of at least 30 inches by 48 inches that allows either a forward or parallel approach by a person using a wheelchair such that bases, enclosures, and fixed seats do not impede approaches to the telephone; with the highest operable part of the telephone mounted no more than 48 inches above the floor for a front approach or no more than 54 inches above the floor for a side approach; that is hearing aid compatible and has a volume control mechanism; with telephone books, if provided, located between 15 and 48 inches above the finished floor for a front approach or between 9 and 54 inches above the finished floor for a side approach; with a cord of at least 29 inches long from the telephone to the handset; and with signage that complies with the Standards. Standards §§ 4.31, 4.30.7(2).

vii. Auditorium

(1) Although there are 532 fixed seats, there are no spaces for persons who use wheelchairs. Provide 6 wheelchair seating areas, each with a minimum clear ground or floor space of 66 inches wide by 48 inches deep for forward or rear access, or 66 inches wide by 60 inches deep for side access. Ensure that the ground or floor at all wheelchair locations is level, firm, stable, and slip resistant; that wheelchair seating areas are an integral part of the fixed seating plan and are located so as to provide people with physical disabilities a choice of admission prices and lines of sight comparable to those available for members of the general public; that wheelchair seating areas adjoin an accessible route that also serves as a means of egress in case of emergency; and that at least one fixed companion seat is provided next to each wheelchair seating area. Standards §§ 4.1.3(19)(a), 4.5, 4.33.

(2) There is no assistive listening system provided. Provide a permanently installed assistive listening system serving the fixed seating. Ensure that the seating served by the system is located within a 50 foot viewing distance of the stage or playing area and has a complete view of the stage or playing area. Provide 21 receivers for use by the general public and signage indicating their availability. Standards §§ 4.30, 4.33.

viii. Toilet rooms - located near the kitchen

(1) The toilet rooms are completely inaccessible. Provide accessible directional signage with the International Symbol of Accessibility at inaccessible toilet rooms indicating the location of the lobby toilet rooms and provide accessible signage with the International Symbol of Accessibility at the lobby toilet rooms. Standards §§ 4.1.2(7)(d), 4.1.6(3)(e)(iii), 4.30.1, 4.30.2, 4.30.3, 4.30.5, 4.30.7.

b. Museum Gift Shop

i. The entrance consists of 2 sets of double doors, creating a vestibule. There is only 36 inches between the edge of the interior door when it is opened 90 degrees and the face of the exterior doors. The interior doors require too much force to operate. Provide a designated accessible entrance that has at least one active leaf with a minimum clear opening width of 32 inches with the door open 90 degrees, measured between the face of the door and the opposite stop; that has a minimum space between two hinged or pivoted doors of 48 inches plus the width of any door swinging into the space, with doors swinging in either the same direction or away from the space between the doors; that has either an automatic door operator or clear and level maneuvering clearance that complies fully with Fig. 25; and that has a threshold not exceeding 1/2 inch in height and beveled with a slope no greater than 1:2. Ensure that all hardware and operating devices have shapes that are easy to grasp with one hand and do not require tight grasping, pinching or twisting of the wrist to operate; and that they are mounted no higher than 48 inches above the finished floor. Standards § 4.13, Figs. 24, 25, 26. Also, ensure that at least one of the interior doors requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

ii. Men’s Toilet Room with Stalls - Located off Hallway of Gift Shop Museum

(1) There is no International Symbol of Accessibility. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

(2) The door requires too much pressure to operate. Provide a door that requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

(3) There is only 8 inches of maneuvering clearance on the push side of the door, which has both a closer and a latch. On the push side of the door, provide maneuvering clearance at least 48 inches deep and provide a minimum of 12 inches of maneuvering clearance on the latch side of the door, or remove the closer or the latch. Standards § 4.13.6, Fig. 25(a).

(4) There is no toilet stall for persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

(5) The “alternate” toilet stall for ambulatory persons with disabilities is not configured to comply with the Standards. Provide at least one stall that is exactly 36 inches wide with an outward swinging, self-closing door and parallel grab bars complying with Fig 30(d). Standards §§ 4.22.4, Fig. 30(d).

(6) The mirror is inaccessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards § 4.19.6.

(7) The lavatory hot water and drain pipes are not insulated or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards § 4.19.4.

iii. Women’s Toilet Room with Stalls - Located off Hallway of Gift Shop Museum

(1) There is no International Symbol of Accessibility. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

(2) The door requires too much pressure to operate. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

(3) There is only 8 inches of maneuvering clearance on the push side of the door, which has both a closer and a latch. On the push side of the door, provide maneuvering clearance at least 48 inches deep and provide a minimum of 12 inches of maneuvering clearance on the latch side of the door, or remove the closer or the latch. Standards § 4.13.6, Fig. 25(a).

(4) There is no toilet stall for persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

(5) The “alternate” toilet stall for ambulatory persons with disabilities is not configured to comply with the Standards. Provide at least one stall that is exactly 36 inches wide with an outward swinging, self-closing door and parallel grab bars complying with Fig 30(d). Standards §§ 4.22.4, Fig. 30(d).

(6) The lavatory hot water and drain pipes are not insulated or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards § 4.19.4.

(7) The sanitary napkin dispenser is mounted at 62 inches above the finished floor. Provide a sanitary napkin dispenser with the controls a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.27.2, 4.27.3, 4.2.4, 4.2.5, 4.2.6.

c. Arena

i. The ramp has slopes that greatly exceed the maximum allowable slopes and there are no handrails. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; with level landings measuring at least 60 inches by 60 inches when the ramp changes direction; and edge protection that is at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter such that the inside handrail is continuous and both handrails have a continuous gripping surface along both sides of the ramp extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface; the handrails do not rotate within their fittings; and both handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.3.8, 4.8.

ii. The only wheelchair seating locations are on the top level and there is no signage reserving these spaces for persons with disabilities and no companion seating is provided. Provide the number of wheelchair seating areas required by table 4.1.3(19)(a), each with a minimum clear ground or floor space of 66 inches wide by 48 inches deep for forward or rear access, or 66 inches wide by 60 inches deep for side access. Ensure that the ground or floor at all wheelchair locations is level, firm, stable, and slip resistant; that wheelchair seating areas are an integral part of the fixed seating plan and are located so as to provide people with physical disabilities a choice of admission prices and lines of sight comparable to those available for members of the general public; that wheelchair seating areas adjoin an accessible route that also serves as a means of egress in case of emergency; and that at least one fixed companion seat is provided next to each wheelchair seating area. Standards §§ 4.1.3(19)(a), 4.5, 4.33.

d. Arena West

i. Men’s Toilet Room with Stalls

(1) The signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

(2) The mirror is not accessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards § 4.19.6.

(3) The mirror shelves and paper towel dispensers are protruding objects that are not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

(4) The foot-operated trough-style lavatories are not usable by persons who use wheelchairs. Provide a lavatory with a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.19.5, 4.27.4.

(5) There is no toilet stall for persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

ii. Women’s Toilet Room with Stalls

(1) The signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

(2) The mirror is not accessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards § 4.19.6.

(3) The foot-operated trough-style lavatories are not usable by persons who use wheelchairs. Provide a lavatory with a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.19.5, 4.27.4.

(4) The mirror shelves and paper towel dispensers are protruding objects that are not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

(5) No “alternate” stall for ambulatory persons with disabilities is provided. Provide at least one stall that is exactly 36 inches wide with an outward swinging, self-closing door and parallel grab bars complying with Fig 30(d). Standards §§ 4.22.4, Fig. 30(d).

(6) In the “standard” toilet stall designated for persons with disabilities, the flush control is mounted on the closed side; the coat hook is inaccessible; and there are no grab bars. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

iii. The highest operable part of the telephone in the concession area is 62 inches above the finished floor. Provide an accessible telephone with a clear floor space of at least 30 inches by 48 inches that allows either a forward or parallel approach by a person using a wheelchair such that bases, enclosures, and fixed seats do not impede approaches to the telephone; with the highest operable part of the telephone mounted no more than 48 inches above the floor for a front approach or no more than 54 inches above the floor for a side approach; that is hearing aid compatible and has a volume control mechanism; with telephone books, if provided, located between 15 and 48 inches above the finished floor for a front approach or between 9 and 54 inches above the finished floor for a side approach; with a cord of at least 29 inches long from the telephone to the handset; and with signage that complies with the Standards. Standards §§ 4.31, 4.30.7(2).

iv. The concession counter is 41 inches above the finished floor. Provide a counter on an accessible route such that a portion of the counter is at least 36 inches wide and no more than 36 inches above the finished floor. Standards §§ 7.2(1), 4.3.

e. Outlaw Trading Post

i. Each leaf of the double doors at the entrance provides only 27 inches of clear opening width. Provide a designated accessible entrance that has at least one active leaf with a minimum 32 inch clear opening width with the door open 90 degrees, measured between the face of the door and the opposite stop; that has either an automatic door operator or clear and level maneuvering clearance that complies fully with Fig. 25; and that has a threshold not exceeding 1/2 inch in height and beveled with a slope no greater than 1:2. Ensure that all hardware and operating devices have shapes that are easy to grasp with one hand and do not require tight grasping, pinching, or twisting of the wrist to operate, and that they are mounted no higher than 48 inches above the finished floor. Standards § 4.13, Figs. 24, 25. Alternatively, provide an automatic door opener that opens both door leaves simultaneously.

ii. There is no level landing at the front entrance. Provide a door so that the floor or ground area within the required clearances is level and clear. Standards § 4.13.6, Fig. 25. Alternatively, provide an automatic door opener.

f. RV Park

i. Men’s Toilet Room with Stalls

(1) The signage is inaccessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

(2) The door has knob hardware. Provide a door with hardware usable with one hand and without tight grasping, pinching, or twisting of the wrist. Lever-operated, push-type, and U-shaped handles are acceptable designs. Standards § 4.13.9.

(3) The paper towel dispenser requires tight pinching and grasping to advance the paper towels. Provide a towel dispenser that can be operated with 5 lbf or less and that can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards § 4.27.4.

(4) The lavatory hot water and drain pipes are not insulated or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards § 4.19.4.

(5) In the toilet stall for persons with disabilities, the flush control is on the closed side. Provide a flush control mounted on the “open” side of the toilet’s clear floor space; 44 inches or less above the finished floor; and requiring a maximum of 5 pounds of force to operate; or provide an automatic flush device. Standards §§ 4.16.5, 4.17.2, 4.27.4.

ii. Women’s Toilet Room with Stalls

(1) The signage is inaccessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.
(2) The door has knob hardware. Provide a door with hardware usable with one hand and without tight grasping, pinching, or twisting of the wrist. Lever-operated, push-type, and U-shaped handles are acceptable designs. Standards § 4.13.9.

(3) The paper towel dispenser requires tight pinching and grasping to advance the paper towels. Provide a towel dispenser that can be operated with 5 lbf or less and that can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards § 4.27.4.

(4) The lavatory hot water and drain pipes are not insulated or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards § 4.19.4.

13. Within 48 months of the effective date of this Agreement, the City will complete the following to the Gallup Sports Complex:

a. Although 3 of the approximately 275 parking spaces are designated as reserved for persons with disabilities, there are no access aisles, the spaces are not clearly demarcated, and none is marked “van-accessible.” On the shortest accessible route to the accessible entrance, provide one van accessible space and six standard spaces designated as reserved for people with disabilities. Standard accessible spaces shall be a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Van accessible spaces shall be a minimum of 96 inches wide and served by access aisles at least 96 inches wide. All spaces designated as reserved for people with disabilities shall have vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. Van accessible spaces shall have an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. Baseball Fields

i. None of the baseball fields have seating areas for persons who use wheelchairs. At each, provide the appropriate number of wheelchair seating areas required from table 4.1.3(19)(a)), each with a minimum clear ground or floor space of 66 inches wide by 48 inches deep for forward or rear access, or 66 inches wide by 60 inches deep for side access. Ensure that the ground or floor at all wheelchair locations is level, firm, stable, and slip resistant; that wheelchair seating areas are an integral part of the fixed seating plan and are located so as to provide people with physical disabilities a choice of admission prices and lines of sight comparable to those available for members of the general public; that wheelchair seating areas adjoin an accessible route that also serves as a means of egress in case of emergency; and that at least one fixed companion seat is provided next to each wheelchair seating area. Standards §§ 4.1.3(19)(a), 4.5, 4.33.

ii. There is no accessible route to any of the baseball field spectator seating areas, because the routes are not firm, stable, and slip-resistant. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

c. Main Building

i. There is no accessible route to the main building. Provide at least one accessible route within the boundary of the site to this element that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

d. Picnic Tables

i. The picnic tables are not accessible to persons using wheelchairs, due to the placement of fixed benches. Provide at least one picnic table on an accessible route such that there is knee space at the table at least 27 inches high, 30 inches wide, and 19 inches deep, and such that the height of the top of the table is between 28 inches and 34 inches above the ground. Standards §§ 4.1.3(18), 4.32.3, 4.32.4.

e. Men’s Toilet Room with Stalls

i. The toilet room sign is mounted on the door. Provide a toilet room sign with raised and Braille characters, mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6.

ii. The hot air dryer is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

f. Women’s Toilet Room with Stalls

i. The accessible sign is mounted on the door. Provide a toilet room sign with raised and Braille characters, mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6.

ii. The hot air dryer is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

iii. In the standard and alternate accessible stalls, the flush valve is mounted on the closed side. Provide a flush control mounted on the “open” side of the toilet’s clear floor space; 44 inches or less above the finished floor; and requiring a maximum of 5 pounds of force to operate; or provide an automatic flush device. Standards §§ 4.1.3(11), 4.22.4, 4.16.5, 4.17.2, 4.27.4.

14. Within 24 months of the effective date of this Agreement, the City will complete the following to the City of Gallup Municipal Building:

a. The curb cut at the street in front of the building has a 1 inch lip in the transition between the curb cut and the public street. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

b. Entrances

i. There are four entrances. The inaccessible entrance on the corner of Second Street and Aztec Street has six steps to the to the entrance but does not have signage directing persons with disabilities to an accessible entrance. There is no signage with the International Symbol of Accessibility at the accessible entrances. Provide accessible directional signage with the International Symbol of Accessibility at inaccessible entrances directing users to the accessible entrance, and provide accessible signage with the International Symbol of Accessibility at all permanent accessible entrances. Standards §§ 4.1.3(8)(d), 4.13, 4.30.

c. The highest operable part of the telephone in main lobby is 64 inches above the finished floor. Provide an accessible telephone with a clear floor space of at least 30 inches by 48 inches that allows either a forward or parallel approach by a person using a wheelchair such that bases, enclosures, and fixed seats do not impede approaches to the telephone; with the highest operable part of the telephone mounted no more than 48 inches above the floor for a front approach or no more than 54 inches above the floor for a side approach; that is hearing aid compatible and has a volume control mechanism; with telephone books, if provided, located between 15 and 48 inches above the finished floor for a front approach or between 9 and 54 inches above the finished floor for a side approach; with a cord of at least 29 inches long from the telephone to the handset; and with signage that complies with the Standards. Standards §§ 4.31, 4.30.7(2).

d. Elevator

i. There is no hoistway signage provided. Provide signage at hoistway entrances with raised and Braille floor designations on both jambs such that the centerline of the characters is 60 inches above the finished floor and the characters are 2 inches high. Standards § 4.10.5, Fig. 20.

ii. The car position indicator does not ring as car passes or stops on floors. Provide visual car position indicators above the car control panel or over the door to show the position of the elevator in the hoistway. Ensure that indicators emit an audible and visual signal as the car passes or stops at a floor served by the elevator, with the corresponding floor designation being illuminated; and that numerals are a minimum of 1/2 inch high. Standards § 4.10.13.

e. Men’s and Women’s Toilet Rooms with Stalls off the Main Lobby. The City will make the changes listed below or, alternatively, if the Council toilet rooms are made fully accessible and are available to all members of the public, the City may forego the following changes and provide accessible directional signage to the Council toilet rooms. If the City opts to make changes to the lobby toilet rooms, for each of the lobby toilet rooms:

i. The signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The entrance door requires too much force to open. Provide a door that requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

iii. The mirror is not accessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards § 4.19.6.

iv. Although there is an audible alarm in the building, there is no visual alarm in these rooms. Provide a visual alarm appliance in the toilet room. Standards §§ 4.28.1, 4.28.3.

v. The paper towel dispenser is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards § 4.4.

vi. There is insufficient turning space provided within the room. Provide an unobstructed turning space at least 60 inches in diameter or a T-shaped space complying with Fig. 3(b). Standards §§ 4.22.3, 4.2.3, Fig. 3.

vii. The lavatory hot water and drain pipes are not covered or configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards § 4.19.4.

viii. There is no toilet stall for persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

f. The Council Chamber toilets are inaccessible. The City has plans to renovate these toilet rooms. If it carries out these renovations, prior to construction and despite other timeframes set forth above, the City will provide the Department with drawings, construction manuals, elevations, and other documents to enable the Department to determine whether this building complies with the Standards. The City will expeditiously carry out any modifications required by the Department to ensure that the facility’s elements comply with the Standards.

15. Within 12 months of the effective date of this Agreement, the City will complete the following to the City Hall Annex (Gallup Joint Utilities):

a. The ramp has been altered, so the alterations standard applies to this element. The slope near the top of the ramp exceeds the maximum allowable slope and there are no handrail extensions. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.1.2(1), 4.1.2(2), 4.3.8, 4.8.

b. There is no directional signage at inaccessible entrance, directing users to the accessible entrance and there is no signage with the International Symbol of Accessibility at the accessible entrance. Provide accessible directional signage with the International Symbol of Accessibility at inaccessible entrances directing users to the accessible entrance, and provide accessible signage with the International Symbol of Accessibility at all permanent accessible entrances. Standards §§ 4.1.3(8)(d), 4.1.3(16)(b), 4.13, 4.30.

c. The City has devised a program access solution to assist persons with disabilities who cannot navigate the stairs to the upper or lower levels. However, the location designated for providing assistance has insufficient clear floor space due to stored miscellaneous items and furniture. Also, a silent test call on the courtesy telephone was ignored. The City will implement and report to the Department its program to resolve these issues.

16. Within 12 months of the effective date of this Agreement, the City will complete the following to the Children’s Library:

a. The entrance consists of two sets of double doors creating a vestibule. Both leaves of the interior door are too hard to open. Provide a door that requires no more than 5 pounds of force to open. Standards §§ 4.1.3(7)(b), 4.13.11(2)(b).

b. There is no level landing at the entry doors. Provide a door so that the floor or ground area within the required clearances is level and clear. Standards §§ 4.1.3(7)(a), 4.13.6, Fig. 25.

c. None of the computer tables have correct height, floor space, and knee space. Provide at least 1 computer on a table or counter that has clear floor space that is 30 inches wide and 48 inches deep, knee clearance at least 27 inches high, 30 inches wide, and 19 inches deep, and a writing surface between 28 and 34 inches above the finished floor. Standards §§ 4.1.3(18), 4.2.4.1, 4.32.

d. Men’s Toilet Room with Stalls (altered element)

i. The signage is mounted on the door. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door requires 9 pounds of force to operate. Provide a door that requires no more than 5 pounds of force to open. Standards §§ 4.1.3(7)(b), 4.13.11(2)(b).

iii. The urinal rim is 23 inches above the finished floor and the flush control is 54 inches above the finished floor. Provide a urinal with an elongated rim mounted 17 inches or less above the finished floor, a clear floor space of at least 30 inches wide and 48 inches deep centered on the urinal, and a flush control height of 44 inches or less above the finished floor. Standards §§ 4.1.3(11), 4.22.5, 4.18.2, 4.18.3, 4.18.4.

iv. Toilet Stall for Persons with Disabilities

(1) The toilet seat height is 16 inches above the finished floor. Provide a toilet with a seat that measures 17 to 19 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.4, 4.16.3, 4.17.2, Fig. 30(d).

(2) The coat hook is inaccessible. Provide a coat hook at a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.1.3(12)(a), 4.25.2, 4.25.3, 4.2.4, 4.2.5, 4.2.6.

e. Women’s Toilet Room with Stalls

i. The signage is mounted on the door. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door requires 9 pounds of force to operate. Provide a door that requires no more than 5 pounds of force to open. Standards §§ 4.1.3(7)(b), 4.13.11(2)(b).

iii. Toilet Stall for Persons with Disabilities

(1) The toilet seat height is 16 inches above the finished floor. Provide a toilet with a seat that measures 17 to 19 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.4, 4.16.3, 4.17.2, Fig. 30(d).

(2) The flush control is on the closed side. Provide a flush control mounted on the “open” side of the toilet’s clear floor space; 44 inches or less above the finished floor; and requiring a maximum of 5 pounds of force to operate; or provide an automatic flush device. Standards §§ 4.1.3(11), 4.22.4, 4.16.5, 4.17.2, 4.27.4.

(3) The coat hook is inaccessible. Provide a coat hook at a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.1.3(12)(a), 4.25.2, 4.25.3, 4.2.4, 4.2.5, 4.2.6.

17. Within 12 months of the effective date of this Agreement, the City will complete the following to the Octavia Fellin Library:

a. Although 2 of the approximately 13 spaces are reserved for persons with disabilities, there are no access aisles, the signs are too low, no space is designated as “van-accessible,” and a curb ramp projects into one of the designated parking space so that if a vehicle is parked in that space, the ramp is not available and there is then no accessible route to the facility from parking. On the shortest accessible route to the accessible entrance, provide 1 van accessible space designated as reserved for people with disabilities. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. The ramp to the main entrance has no handrail extensions, the handrails do not continue to the top of the ramp, and there is no level landing at the top of the ramp. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.1.2(1), 4.1.2(2), 4.3.8, 4.8.

c. There is no level landing or automatic door opener at the entrance. Provide a door so that the floor or ground area within the required clearances is level and clear or provide an automatic door opener. Standards §§ 4.1.3(7)(a), 4.13.6, Fig. 25.

d. The entrance consists of 2 sets of double doors, creating a vestibule. Each leaf provides only 28 inches of clear opening width. Provide a designated accessible entrance that has at least one active leaf with a minimum clear opening width of 32 inches with the door open 90 degrees, measured between the face of the door and the opposite stop; that has a minimum space between two hinged or pivoted doors of 48 inches plus the width of any door swinging into the space, with doors swinging in either the same direction or away from the space between the doors; that has either an automatic door operator or clear and level maneuvering clearance that complies fully with Fig. 25; and that has a threshold not exceeding 1/2 inch in height and beveled with a slope no greater than 1:2. Ensure that all hardware and operating devices have shapes that are easy to grasp with one hand and do not require tight grasping, pinching or twisting of the wrist to operate; and that they are mounted no higher than 48 inches above the finished floor. Standards §§ 4.1.3(7)(a), 4.13, Figs. 24, 25, 26.

e. The interior set of doors requires too much force to open. Provide a door that requires no more than 5 pounds of force to open. Standards §§ 4.1.3(7)(b), 4.13.11(2)(b).

f. There is a 1-1/2 inch change in level on the route back to the “quiet zone.” Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

g. Drinking fountain

i. The drinking fountain is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards §§ 4.1.2(3), 4.4.

ii. The drinking fountain is not accessible to persons who have difficulty bending or stooping. Provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser, or by such other means as would achieve the required accessibility for each group of people. Standards §§ 4.1.3(10)(a).

h. Men’s and Women’s Toilet Rooms with Stalls at the Rear of the Meeting Room

i. The entry doors require too much pressure to operate. Provide doors that requires no more than 5 pounds of force to open. Standards § 4.13.11(2)(b).

ii. There room signage has no accessible features. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

iii. The flush control in the Women’s room is on the closed side. Provide a flush control mounted on the “open” side of the toilet’s clear floor space; 44 inches or less above the finished floor; and requiring a maximum of 5 pounds of force to operate; or provide an automatic flush device. Standards §§ 4.16.5, 4.17.2, 4.27.4.

iv. The side grab bar is mounted 36 inches long. Provide a side grab bar that is at least 42 inches in overall length, with the far end mounted at least 54 inches from the rear wall and the closer end 12 inches or less from the rear wall; mounted 33 to 36 inches above the finished floor; with a diameter between 1 1/4 and 1 1/2 inches; with 1 1/2 inches between the grab bar and the wall; and at least 1 1/2 inches between the grab bar and any other object, such as the toilet paper dispenser. Standards §§ 4.1.3(11), 4.22.4, 4.16.4, 4.26.2, Fig. 29.

18. Within 12 months of the effective date of this Agreement, the City will complete the following to the Gallup Municipal Airport:

a. Although 4 of the 120 parking spaces are designated as reserved for persons with disabilities, there are no clearly-marked access aisles for some of these spaces and no space is designated as “van-accessible.” On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 4 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. The entrance consists of a double-leaf doorway, with no automatic door opener. Each leaf provides only 30 inches of clear opening width. Provide a designated accessible entrance that has at least one active leaf with a minimum 32 inch clear opening width with the door open 90 degrees, measured between the face of the door and the opposite stop; that has either an automatic door operator or clear and level maneuvering clearance that complies fully with Fig. 25; and that has a threshold not exceeding 1/2 inch in height and beveled with a slope no greater than 1:2. Ensure that all hardware and operating devices have shapes that are easy to grasp with one hand and do not require tight grasping, pinching, or twisting of the wrist to operate, and that they are mounted no higher than 48 inches above the finished floor. Standards §§ 4.1.3(7)(a), 4.13, Figs. 24, 25.

c. The ticketing counter measures 46 inches above the finished floor and no equivalent facilitation is provided. Provide a counter on an accessible route such that a portion of the counter is at least 36 inches wide and no more than 36 inches above the finished floor, or provide an auxiliary counter with a maximum height of 36 inches in close proximity to the main counter, or provide equivalent facilitation. Equivalent facilitation may be provided in the form of a folding shelf attached to the main counter, an auxiliary table nearby, a clip board made available to the public, or other means. Standards §§ 4.1.1(2), 7.2(2), 4.1.3(1), 4.3.

d. The drinking fountain in the main hallway is not accessible to persons who have difficulty bending or stooping. Provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser, or by such other means as would achieve the required accessibility for each group of people. Standards §§ 4.1.3(10)(a).

e. Men’s Toilet Room - Single User (altered)

i. There is no accessible signage. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The mirror is inaccessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.6, 4.19.6.

iii. The lavatory hot water and drain pipes are not insulated or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards §§ 4.1.3(11), 4.22.6, 4.19.4.

iv. The rim height of the urinal is not accessible. Provide a urinal with an elongated rim mounted 17 inches or less above the finished floor, a clear floor space of at least 30 inches wide and 48 inches deep centered on the urinal, and a flush control height of 44 inches or less above the finished floor. Standards §§ 4.1.3(11), 4.22.5, 4.18.2, 4.18.3, 4.18.4.

v. The door swings into the required clear floor space at the toilet. Ensure that no door swings into the required clear floor space at any accessible fixture. Standards §§ 4.1.3(11), 4.22.2.

vi. The side grab bar is too short. Provide a side grab bar that is at least 42 inches in overall length, with the far end mounted at least 54 inches from the rear wall and the closer end 12 inches or less from the rear wall. Standards §§ 4.1.3(11), 4.22.4, 4.16.4, Fig. 29(b).
vii. The toilet centerline is 16-1/2 inches from the side wall. Provide a toilet with a centerline that measures 18 inches from the near side wall. Standards §§ 4.1.3(11), 4.22.4, 4.16.2, Fig. 28.

f. Women’s Toilet Room - Single User (altered)

i. There is no accessible signage. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The mirror is inaccessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.6, 4.19.6.

iii. The lavatory hot water and drain pipes are not insulated or otherwise configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards §§ 4.1.3(11), 4.22.6, 4.19.4.

iv. The door swings into the required clear floor space at the toilet. Ensure that no door swings into the required clear floor space at any accessible fixture. Standards §§ 4.1.3(11), 4.22.2.

v. The seat cover dispenser is mounted on the rear wall above the toilet. Provide a seat cover dispenser such that the controls comply with Fig. 5 for a forward reach or with Fig. 6 for a side reach and such that it is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach, respectively, by a person using a wheelchair. Standards §§ 4.1.3(13), 4.27.2, 4.27.3, 4.2.4, 4.2.5, 4.2.6.

vi. The side grab bar is too short. Provide a side grab bar that is at least 42 inches in overall length, with the far end mounted at least 54 inches from the rear wall and the closer end 12 inches or less from the rear wall. Standards §§ 4.1.3(11), 4.22.4, 4.16.4, Fig. 29(b).

vii. The toilet centerline is 16-1/2 inches from the side wall. Provide a toilet with a centerline that measures 18 inches from the near side wall. Standards §§ 4.1.3(11), 4.22.4, 4.16.2, Fig. 28.

viii. The toilet paper dispenser is too far from the rear wall. Provide a toilet paper dispenser that is mounted within reach, with its top at least 1 1/2 inches under the side grab bar, and centered at least 19 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.4, 4.16.6, Fig. 29(b).

g. Gallup Flying Services

i. The exterior entrance door has a push/latch side and pull/latch side maneuvering clearance of only 1 inch. On the pull side of the door, provide maneuvering clearance at least 60 inches deep and provide a minimum of 18 inches (24 inches is preferred) of maneuvering clearance on the latch side of the door. On the push side of the door, provide maneuvering clearance at least 48 inches deep and provide a minimum of 12 inches of maneuvering clearance on the latch side of the door, or remove the closer or the latch. Standards §§ 4.1.3(7)(b), 4.13.6, Fig. 25(a).

ii. The drinking fountain is not cane-detectable from either side. Provide a drinking fountain at this location such that its bottom leading edges measure no more than 27 inches above the finished floor or protrude no more than 4 inches into the walkway. Standards §§ 4.1.2(3), 4.4.

iii. The toilet room is completely inaccessible. Provide accessible directional signage with the International Symbol of Accessibility at the inaccessible toilet rooms indicating the location of airport toilet rooms. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.2, 4.30.3, 4.30.5, 4.30.7.

19. Within 12 months of the effective date of this Agreement, the City will complete the following to the Gallup Police Department/Municipal Court:

a. Although 1 of the approximately 20 parking spaces is reserved for persons with disabilities, the space is not level, it is not designated as “van-accessible,” and the pavement markings are not clear. On the shortest accessible route to the accessible entrance, provide 1 van accessible space designated as reserved for people with disabilities. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. There are no handrails for the ramp with brick sides at the head of the parking reserved for persons with disabilities. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Standards §§ 4.1.2(1), 4.1.2(2), 4.8.5.

c. The other ramp has no edge protection and no outside handrail. Provide a ramp with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.1.2(1), 4.1.2(2), 4.3.8, 4.8.

d. The main public entrance on the police side consists of two sets of doors, creating a vestibule. The vestibule provides less than 48 inches deep plus the width of the door and the doors do not open simultaneously. Provide a designated accessible entrance that has at least one active leaf with a minimum clear opening width of 32 inches with the door open 90 degrees, measured between the face of the door and the opposite stop; that has a minimum space between two hinged or pivoted doors of 48 inches plus the width of any door swinging into the space, with doors swinging in either the same direction or away from the space between the doors; that has either an automatic door operator or clear and level maneuvering clearance that complies fully with Fig. 25; and that has a threshold not exceeding 1/2 inch in height and beveled with a slope no greater than 1:2. Ensure that all hardware and operating devices have shapes that are easy to grasp with one hand and do not require tight grasping, pinching or twisting of the wrist to operate; and that they are mounted no higher than 48 inches above the finished floor. Standards §§ 4.1.3(7)(a), 4.13, Figs. 24, 25, 26.

e. The drinking fountain on the “police” side require too much force to operate; it protrudes into the circulation route and is not cane-detectable; and there is no fountain that is accessible to persons who have difficulty bending or stooping. Provide at least one drinking fountain with a spout height no higher than 36 inches, measured from the finished floor or ground surface to the spout outlet; and a spout located at the front of the unit that directs the water flow in a trajectory that is nearly parallel to the front of the unit and is positioned so the flow of water is within 3 inches of the front edge of the fountain and at least 4 inches high. Ensure that fountain controls are operable with one hand, require 5 lbf or less to operate without tight grasping, pinching, or twisting of the wrist; and are front mounted or side mounted near the front edge. Additionally, provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser; or by such other means as would achieve the required accessibility for each group of people. Standards §§ 4.1.3(10), 4.15, 4.27.4, Fig. 27. Ensure that the drinking fountain at this location is such that its bottom leading edges measure no more than 27 inches above the finished floor or protrude no more than 4 inches into the walkway. Standards §§ 4.1.2(3), 4.4.

f. Men’s Toilet Room with Stalls Near the Front Entrance

i. The accessible signage is mounted on the door. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door requires too much force to open. Provide a door that requires no more than 5 pounds of force to open. Standards §§ 4.1.3(7)(b), 4.13.11(2)(b).

iii. In the toilet stall for persons with disabilities, the toilet seat is 20 inches above the finished floor. Provide a toilet with a seat that measures 17 to 19 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.4, 4.16.3, 4.17.2, Fig. 30(d).

g. Women’s Toilet Room with Stalls Near the Front Entrance

i. The accessible signage is mounted on the door. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door requires too much force to open. Provide a door that requires no more than 5 pounds of force to open. Standards §§ 4.1.3(7)(b), 4.13.11(2)(b).

iii. In the toilet stall for persons with disabilities, the toilet seat is 20 inches above the finished floor. Provide a toilet with a seat that measures 17 to 19 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.4, 4.16.3, 4.17.2, Fig. 30(d).

iv. No accessible coat hook has been provided. Provide a coat hook at a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.1.3(12)(a), 4.25.2, 4.25.3, 4.2.4, 4.2.5, 4.2.6.

h. Municipal Court

i. No assistive listening system is provided. Provide a permanently installed assistive listening system (ALS) or a portable ALS with an adequate number of electrical outlets or other supplementary wiring necessary to support a portable assistive listening system. Also provide at least 2 receivers for use by the general public and signage indicating their availability. Standards §§ 4.1.3(19)(b), 4.30, 4.33.

ii. The municipal court counter is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards §§ 4.1.2(3), 4.4.

20. Within 12 months of the effective date of this Agreement, the City will complete the following to Bethany Christian Church - Polling Place

a. Parking

i. The parking lot at the main entrance has only 2 standard spaces designated for a person with a disability, there is no van accessible space or access aisle or appropriate signage. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 2 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that the van accessible space is a minimum of 96 inches wide and served by an access aisle at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. Accessible Route

i. The route from the parking area at the front of the church to the voting area inaccessible because the built up curb ramp is not firm, stable and slip resistant, and it is not placed appropriately. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, 4.7.8, Fig. 7.

21. Within 12 months of the effective date of this Agreement, the City will complete the following to Grace Navajo Baptist Church - Polling Place

a. Parking

i. Although the parking lot has a number of parking spaces, the designated accessible spaces are not clearly designated. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space and at least 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible space is a minimum of 96 inches wide and served by an access aisle at least 60 inches wide. Ensure that van accessible space is a minimum of 96 inches wide and served by an access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

ii. The route from the parking area to the voting area at the side of the church is inaccessible because the surface is crushed stone and loose gravel. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.3, 4.5, Fig. 7.

iii. Exterior Entrance and Doors

(1) The front entrance to the church is inaccessible because there is approximately 2 inch step to the threshold. Provide an accessible door with a threshold that is no greater than 1/4 inch, or is no greater than 1/2 inch and is beveled with a slope no greater than 1:2. Standards §§ 4.13.8, 4.5.2.

22. Within 12 months of the effective date of this Agreement, the City will complete the following to Western Skies MHP Recreation Hall - Polling Place

a. Parking

i. Although the parking lot has a total of 6 parking spaces, an inadequate number are designated as reserved for people with disabilities, there are no access aisles, or van accessible spaces. On the shortest accessible route to the accessible entrance, provide 1 van accessible space a minimum of 96 inches wide, served by access aisles at least 96 inches wide, with vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles, and with an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Standards §§ 4.1.2(5)(b), 4.6, 4.30.7(1).

23. Within 12 months of the effective date of this Agreement, the City will complete the following to East Side Fire Department - Polling Place

a. Parking

i. Although the parking lot has a total of 6 parking spaces, an inadequate number are van accessible, and there are no access aisles. On the shortest accessible route to the accessible entrance, provide 1 van accessible space a minimum of 96 inches wide, served by access aisles at least 96 inches wide, with vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles, and with an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Standards §§ 4.1.2(5)(b), 4.6, 4.30.7(1).

ii. Exterior Entrance and Doors

(1) The main entrance door is inaccessible because there is a slope of three degrees within the door’s required maneuvering clearance. Provide a door so that the floor or ground area within the required clearances is level and clear. Standards § 4.13.6, Fig. 25.

24. Within 12 months of the effective date of this Agreement, the City will complete the following to Educational Development Center - Polling Place

a. Parking

i. Although there is parking, parking for voters is across the street in an unpaved dirt lot. On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible space is a minimum of 96 inches wide and served by an access aisle at least 60 inches wide. Ensure that the van accessible space is a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At the van accessible space, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

Within 12 months of the effective date of this Agreement, the City will complete the following to the City Parking at Second and Aztec Streets:

b. Although 8 of the approximately 110 spaces are reserved for persons with disabilities, there is no vertical signage and none of the spaces are designated as “van-accessible.” On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 4 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

25. Within 12 months of the effective date of this Agreement, the City will complete the following to the Larry Brian Mitchell Recreation Center:

a. Although 4 of the 94 parking spaces are reserved for persons with disabilities, the reserved spaces are not 96 inches wide; no vertical signage is provided; no space is designated as “van-accessible;” the pavement markings are not clear; and the spaces are not dispersed. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 3 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. The slope of the ramp exceeds 1:12; there is inadequate edge protection; there is no level landing at the bottom of the ramp; some portions of the ramp do not have handrails on both sides; there are not consistent handrail extensions at the top and bottom of the ramp; and there is a distance of 3-3/4 inches between one of the handrails and the wall. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.1.2(1), 4.1.2(2), 4.3.8, 4.8.

c. Exterior Entrance and Doors

i. There is no International Symbol of Accessibility at the inaccessible entrance. Provide accessible, directional signage with the International Symbol of Accessibility at inaccessible entrances directing users to the accessible entrance, and provide accessible signage with the International Symbol of Accessibility at all permanent accessible entrances. Standards §§ 4.1.3(8)(d), 4.1.3(16)(b), 4.13, 4.30.

ii. The threshold at the more accessible of the entrances is 1 inch high. Provide an accessible door with a threshold that is no greater than 1/4 inch, or is no greater than 1/2 inch and is beveled with a slope no greater than 1:2. Standards §§ 4.1.3(7)(a), 4.13.8, 4.5.2.

d. Drinking Fountains

i. The drinking fountains in the hallway to the weight room and in the art room are not accessible to persons who use wheelchairs. Provide at least one drinking fountain with a spout height no higher than 36 inches, measured from the finished floor or ground surface to the spout outlet; and a spout located at the front of the unit that directs the water flow in a trajectory that is nearly parallel to the front of the unit and is positioned so the flow of water is within 3 inches of the front edge of the fountain and at least 4 inches high. Ensure that fountain controls are operable with one hand, require 5 pounds of force or less to operate without tight grasping, pinching, or twisting of the wrist; and are front mounted or side mounted near the front edge.

e. Art Room

i. The double sink has no knee space and has twist-style faucet handles. Provide a sink with a counter or rim mounted no higher than 34 inches above the finish floor and provide faucets that are operable with one hand and that do not require tight grasping, pinching, or twisting of the wrist. Lever-operated, push-type, touch-type, or electronically controlled mechanisms are acceptable designs. Standards §§ 4.24, 4.27.4.

ii. There are two steps up to the toilet room. Provide accessible directional signage to the accessible toilet rooms. Standards §§ 4.30.1, 4.30.2, 4.30.3, 4.30.5.

f. Men’s Toilet Room with Stalls off Gym

i. The signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.1.6(1)(b), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The flush control in the toilet stall for persons with disabilities is on the closed side. Provide a flush control mounted on the “open” side of the toilet’s clear floor space; 44 inches or less above the finished floor; and requiring a maximum of 5 pounds of force to operate; or provide an automatic flush device. Standards §§ 4.1.3(11), 4.22.4, 4.16.5, 4.17.2, 4.27.4.

g. Women’s Toilet Room with Stalls off Gym

i. The signage is not accessible. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The side grab bar in the toilet stall for persons with disabilities is too short. Provide a side grab bar that is at least 40 inches in overall length, with the far end mounted at least 52 inches from the rear wall and the closer end 12 inches or less from the rear wall. Standards §§ 4.1.3(11), 4.22.4, 4.17.6, Figs. 30(a), (d).

26. Within 24 months of the effective date of this Agreement, the City will complete the following to the Harry Runnels Swimming Pool, Playground of Dreams:

a. Although 3 of the 56 parking spaces are reserved for persons with disabilities, there is no vertical signage; no spaces are designated as “van-accessible,” the pavement markings are not clear; and the spaces and access aisles are not level. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 2 standard spaces designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. The short ramp at the top of the parking for persons with disabilities is very steep (7 degrees). Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Standards §§ 4.1.2(1), 4.1.2(2), 4.3.8, 4.8.

c. The longer ramp parallel to the front of the building has no handrail extensions, inadequate edge protection, and there is no level landing at the bottom of the ramp. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Standards §§ 4.1.2(1), 4.1.2(2), 4.3.8, 4.8.

d. The drinking fountain in the main front hall near the men’s toilet room is situated so as to prevent either a forward or side approach, due to the encroachment of a security bollard on the required clear floor space. Provide at least one drinking fountain with a clear floor space of 30 inches by 48 inches of clear floor space and otherwise designed to be accessible to persons who use wheelchairs. For each accessible drinking fountain, provide a drinking fountain that is accessible to people who have difficulty bending or stooping. This can be accommodated by the use of a “hi-lo” fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who have difficulty bending; by providing a fountain accessible to people who use wheelchairs and a cup dispenser; or by such other means as would achieve the required accessibility for each group of people. Standards §§ 4.1.3(10), 4.15, 4.27.4, Fig. 27.

e. The drinking fountain in the pool area is not accessible to persons who have difficulty bending or stooping and it is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards §§ 4.1.2(3), 4.4.

f. Men’s Toilet Room with Stalls off Main Hall Entrance

i. The signage does not have the International Symbol of Accessibility, there are no Braille or raised characters, and it is mounted on the door. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door requires too much pressure to operate. Provide a door that requires no more than 5 pounds of force to open. Standards §§ 4.1.3(7)(b), 4.13.11(2)(b).

iii. There is only 9 inches of maneuvering clearance on the pull/latch side of the door, which requires a forward approach. On the pull side of the door, provide maneuvering clearance at least 60 inches deep and provide a minimum of 18 inches (24 inches is preferred) of maneuvering clearance on the latch side of the door. Standards §§ 4.1.3(7)(b), 4.13.6, Fig. 25(a).

iv. The hand dryers are protruding objects that are not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards §§ 4.1.2(3), 4.4.

v. The mirror is not accessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.6, 4.19.6.

vi. Although one of the toilet stalls is loosely configured as an “alternate” stall for ambulatory persons with disabilities, there is no toilet stall for persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22.4, 4.22.7, 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

g. Women’s Toilet Room with Stalls off Main Hall Entrance

i. The signage does not have the International Symbol of Accessibility, there are no Braille or raised characters, and it is mounted on the door. Provide a toilet room sign with the International Symbol of Accessibility and raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6, 4.30.7.

ii. The door requires too much pressure to operate. Provide a door that requires no more than 5 pounds of force to open. Standards §§ 4.1.3(7)(b), 4.13.11(2)(b).

iii. The hand dryers are protruding objects that are not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards §§ 4.1.2(3), 4.4.

iv. The mirror is not accessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.6, 4.19.6.

v. Although one of the toilet stalls is loosely configured as an “alternate” stall for ambulatory persons with disabilities, there is no toilet stall for persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22.4, 4.22.7, 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

h. Men’s Locker Room

i. The individually curtained dressing rooms are 41-1/2 inches by 49 inches and built-in benches take up 17 inches of the depth of the clear floor space. Provide at least one accessible dressing room in this area on an accessible route with accessible signage indicating its location. Ensure that accessible dressing rooms fitted with swinging or sliding doors contain sufficient clear floor space to allow a person using a wheelchair to make a 180-degree turn inside the room and that no door swings into any part of the turning space. Ensure that private accessible dressing rooms fitted with curtained openings at least 32 inches wide contain either a clear space of 60 inches in diameter, or a “T” shaped turning space that complies with Fig. 3(b). Provide a bench 24 inches by 48 inches fixed to the wall along the longer dimension and mounted between 17 and 19 inches above the finished floor to the top of the bench. Standards §§ 4.1.3(21), 4.35, 4.30, 4.26.3, 4.2, 4.3, Fig. 3.
.
ii. The coat and towel hooks at the individual dressing rooms are not accessible. Provide a coat hook or towel hook in an accessible dressing room at a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.1.3(12)(a), 4.25.2, 4.25.3, 4.2.4, 4.2.5, 4.2.6.

iii. In the common area of the room, there are no transfer benches for persons with disabilities. Provide a 24 inch by 48 inch bench fixed to the wall along the bench’s longer dimension. Ensure that the bench has sufficient structural strength and is mounted with its surface between 17 inches and 19 inches above the finished floor. Provide clear floor space alongside the bench to allow a person using a wheelchair to make a parallel transfer onto the bench. Standards §§ 4.1.3(21), 4.35.4, 4.26.3.

iv. The hair dryers are protruding objects that are not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards §§ 4.1.2(3), 4.4.

v. The locker hardware requires tight pinching to operate. Provide at least one locker with mechanical controls, if any, that can be operated with 5 pounds or force or less and that can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.1.3(13), 4.27.4.

vi. No accessible shower is provided. Provide one shower in this room that is exactly 36 inches wide and 36 inches deep with a 48 inch long and 36 inch wide clear floor space alongside the shower opening, and an L-shaped shower seat mounted on the wall opposite the controls and extending the full depth of the stall; OR one shower that is at least 30 inches deep and 60 inches wide with no curb or threshold and with a 36 inch deep and 60 inch wide clear floor space at the shower opening. Either shower configuration shall be equipped with grab bars, controls, a shower spray unit, and a seat, curb, and an enclosure, if provided, that comply fully with the Standards and with Figs. 35, 36, and 37, as applicable. Standards §§ 4.1.3(11), 4.21, Figs. 35, 36, 37.

vii. No accessible toilet, lavatory, mirror, or other “toilet room” elements are provided. Provide an accessible toilet, lavatory, and other toilet room elements such that all, including signage, door, door hardware, clear floor space, water closet, urinal (if provided), grab bars, lavatory, mirror, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22, 4.13, 4.16, 4.18, 4.19, 4.26, 4.27, 4.30, Figs. 28, 29.

i. Women’s Locker Room

i. The individually curtained dressing rooms are 41-1/2 inches by 49 inches and built-in benches take up 17 inches of the depth of the clear floor space. Provide at least one accessible dressing room in this area on an accessible route with accessible signage indicating its location. Ensure that accessible dressing rooms fitted with swinging or sliding doors contain sufficient clear floor space to allow a person using a wheelchair to make a 180-degree turn inside the room and that no door swings into any part of the turning space. Ensure that private accessible dressing rooms fitted with curtained openings at least 32 inches wide contain either a clear space of 60 inches in diameter, or a “T” shaped turning space that complies with Fig. 3(b). Provide a bench 24 inches by 48 inches fixed to the wall along the longer dimension and mounted between 17 and 19 inches above the finished floor to the top of the bench. Standards §§ 4.1.3(21), 4.35, 4.30, 4.26.3, 4.2, 4.3, Fig. 3.

ii. The coat and towel hooks at the individual dressing rooms are not accessible. Provide a coat hook or towel hook in an accessible dressing room at a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. Standards §§ 4.1.3(12)(a), 4.25.2, 4.25.3, 4.2.4, 4.2.5, 4.2.6.

iii. In the common area of the room, there are no transfer benches for persons with disabilities. Provide a 24 inch by 48 inch bench fixed to the wall along the bench’s longer dimension. Ensure that the bench has sufficient structural strength and is mounted with its surface between 17 inches and 19 inches above the finished floor. Provide clear floor space alongside the bench to allow a person using a wheelchair to make a parallel transfer onto the bench. Standards §§ 4.1.3(21), 4.35.4, 4.26.3.

iv. The hair dryers are protruding objects that are not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards §§ 4.1.2(3), 4.4.

v. The locker hardware requires tight pinching to operate. Provide at least one locker with mechanical controls, if any, that can be operated with 5 pounds or force or less and that can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.1.3(13), 4.27.4.

vi. No accessible shower is provided. Provide one shower in this room that is exactly 36 inches wide and 36 inches deep with a 48 inch long and 36 inch wide clear floor space alongside the shower opening, and an L-shaped shower seat mounted on the wall opposite the controls and extending the full depth of the stall; OR one shower that is at least 30 inches deep and 60 inches wide with no curb or threshold and with a 36 inch deep and 60 inch wide clear floor space at the shower opening. Either shower configuration shall be equipped with grab bars, controls, a shower spray unit, and a seat, curb, and an enclosure, if provided, that comply fully with the Standards and with Figs. 35, 36, and 37, as applicable. Standards §§ 4.1.3(11), 4.21, Figs. 35, 36, 37.

vii. No accessible toilet, lavatory, mirror, or other “toilet room” elements are provided. Provide an accessible toilet, lavatory, and other toilet room elements such that all, including signage, door, door hardware, clear floor space, water closet, urinal (if provided), grab bars, lavatory, mirror, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22, 4.13, 4.16, 4.18, 4.19, 4.26, 4.27, 4.30, Figs. 28, 29.

j. Unisex Steam Room

i. There is a 3 1/2 inch step into the steam room. Provide at least one accessible route into the steam room that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

ii. The door to the steam room has an inadequate clear opening width. Provide a door with a clear opening of 32 inches with the door open 90 degrees, measured between the face of the door and the opposite stop. Standards §§ 4.1.3(7)(b), 4.13.5, Fig. 24.

k. Playground of Dreams

i. The sidewalk to the left entrance has a sharp drop-off at the bottom to a dirt surface. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

ii. The drinking fountain is a protruding object that is not cane-detectable. Provide an accessible route at this location such that no objects with their bottom leading edges measuring between 27 inches and 80 inches above the finished floor protrude more than 4 inches into walks, halls, corridors, passageways, or aisles. Free-standing objects mounted on posts or pylons may overhang 12 inches maximum from 27 inches to 80 inches above the ground or finished floor. Standards §§ 4.1.2(3), 4.4.

iii. There is no accessible route to the play equipment and benches. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

iv. The portable toilets are not accessible. Provide an accessible toilet facility such that all of the facility’s elements, including signage, door, door hardware, clear floor space, water closet, urinal (if provided), grab bars, lavatory, mirror, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22, 4.13, 4.16, 4.18, 4.19, 4.26, 4.27, 4.30, Figs. 28, 29.

v. At the right-hand entrance, there is no curb cut to the rolling gates for direct access to covered picnic tables. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

vi. The picnic tables have inadequate knee clearance, due to fixed benches. Provide at least one picnic table on an accessible route such that there is knee space at the table at least 27 inches high, 30 inches wide, and 19 inches deep, and such that the height of the top of the table is between 28 inches and 34 inches above the ground. Standards §§ 4.1.3(18), 4.32.3, 4.32.4.

vii. There is no accessible route to the trash cans at the picnic shelter. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

27. Within 12 months of the effective date of this Agreement, the City will complete the following to Hadden Park:

a. Although there are 4 parking spaces, none is reserved for persons with disabilities. On the shortest accessible route to the accessible entrance, provide 1 van accessible space designated as reserved for people with disabilities. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. Playground

i. The route from the parking to the ramp into the playground is excessively long and is not the general route used by the public. There is no accessible route to the younger kids’ play area. The ramp leading into the playground has a sharp drop-off to sand. There is no accessible route to any piece of play equipment. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

28. Within 12 months of the effective date of this Agreement, the City will complete the following to Tom Saucedo Memorial Park:

a. Although there are 30 parking spaces, none are provided for persons with disabilities. On the shortest accessible route to the accessible entrance, provide 1 van accessible space and 1 standard space designated as reserved for people with disabilities. Ensure that standard accessible spaces are a minimum of 96 inches wide and served by access aisles at least 60 inches wide. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide. At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles. At van accessible spaces, provide an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant. Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

b. The recently relocated, metal building has no accessible route or entry. Provide at least one accessible route within the boundary of the site connecting this element that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

c. The Department was unable to survey a building at this park that was under construction at the time of the Department’s onsite review. Within 3 months of the effective date of this Agreement, despite other timeframes set forth above, the City will provide the Department with drawings, construction manuals, elevations, and other documents to enable the Department to determine whether this building complies with the Standards. The City will expeditiously carry out any modifications required by the Department to ensure that the facility’s elements comply with the Standards.

d. The entrance into the park is not passable by persons who use wheelchairs, as it requires users to navigate a 24 inch wide U-turn gate. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

e. The portable toilet is not accessible to persons with disabilities. Provide an accessible toilet facility such that all of the facility’s elements, including signage, door, door hardware, clear floor space, water closet, urinal (if provided), grab bars, lavatory, mirror, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22, 4.13, 4.16, 4.18, 4.19, 4.26, 4.27, 4.30, Figs. 28, 29.

f. There is no accessible route to the ticket house or the track. Provide at least one accessible route within the boundary of the site connecting each of these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

g. The ticket window counters are too high. Provide a counter on an accessible route such that a portion of the counter is at least 36 inches wide and no more than 36 inches above the finished floor, or provide an auxiliary counter with a maximum height of 36 inches in close proximity to the main counter, or provide equivalent facilitation. Equivalent facilitation may be provided in the form of a folding shelf attached to the main counter, an auxiliary table nearby, a clip board made available to the public, or other means. Standards §§ 4.1.1(2), 7.2(2), 4.1.3(1), 4.3.

h. The ticket house has round door knobs. Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. Standards §§ 4.1.3(7)(b), 4.13.9.

i. There is inadequate maneuvering clearance on the pull/latch side of the door to the ticket house, which requires a hinge-side approach and there is inadequate maneuvering clearance on the push side as well. On the pull side of the door, provide a path at least 60 inches wide when the approach is a side approach from the hinge side and there is a minimum of 36 inches to the latch side of the door, OR provide a path between 54 inches and 59 inches wide when the approach is a side approach from the hinge side and there is a minimum of 42 inches to the latch side of the door. On the push side of the door, provide maneuvering clearance at least 48 inches deep and provide a minimum of 12 inches of maneuvering clearance on the latch side of the door, or remove the closer or the latch. Standards §§ 4.1.3(7)(b), 4.13.6, Figs. 25(a) and (b).

j. There are no wheelchair seating locations at the bleachers. Provide the number of wheelchair seating locations required by table 4.1.3(19)(a), each with a minimum clear ground or floor space of 66 inches wide by 48 inches deep for forward or rear access, or 66 inches wide by 60 inches deep for side access. Ensure that the ground or floor at all wheelchair locations is level, firm, stable, and slip resistant; that wheelchair seating areas are an integral part of the fixed seating plan and are located so as to provide people with physical disabilities a choice of admission prices and lines of sight comparable to those available for members of the general public; that wheelchair seating areas adjoin an accessible route that also serves as a means of egress in case of emergency; and that at least one fixed companion seat is provided next to each wheelchair seating area. Standards §§ 4.1.3(19)(a), 4.5, 4.33.

29. Within 12 months of the effective date of this Agreement, the City will complete the following to Bubany Park:

a. The picnic table is not accessible. Provide at least one picnic table on an accessible route such that there is knee space at the table at least 27 inches high, 30 inches wide, and 19 inches deep, and such that the height of the top of the table is between 28 inches and 34 inches above the ground. Standards §§ 4.1.3(18), 4.32.3, 4.32.4.

b. There are steps onto playground equipment and the playground surface is not firm, stable, and slip-resistant. Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.

30. Within 24 months of the effective date of this Agreement, the City will complete the following to the Neighborhood Center (Ford Canyon Senior Citizen’s Center):

a. The City has submitted interior renovation plans and the Project Manual for the Department’s review. The Department is reviewing these documents for compliance with the ADA. Upon completion of this review, the Department will notify the City of any modifications needed to bring the facility into full compliance with the ADA. The City will complete such modifications during the normal course of construction or within 3 months of receiving the Department’s notification, whichever is earlier.

b. The water height of the drinking fountain off the gym and cafeteria is too low. Provide at least one drinking fountain with a spout height no higher than 36 inches, measured from the finished floor or ground surface to the spout outlet; and a spout located at the front of the unit that directs the water flow in a trajectory that is nearly parallel to the front of the unit and is positioned so the flow of water is within 3 inches of the front edge of the fountain and at least 4 inches high. Standards §§ 4.1.3(10), 4.15, 4.27.4, Fig. 27.

c. The toilet rooms serving the gym and cafeteria are totally inaccessible. Provide accessible directional signage with the International Symbol of Accessibility at inaccessible toilet rooms indicating the location of the accessible toilet rooms at the nearby Northside Senior Center, and provide accessible signage with the International Symbol of Accessibility at all accessible toilet rooms. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.2, 4.30.3, 4.30.5, 4.30.7.

d. The men’s gang-style showers off the main hallway are up a 4 1/2 inch step, the shower controls are twist-style knob hardware, the shower heads are fixed at 48 inches above the finished floor, there are no grab bars, and the clothes hook is 63 inches above the finished floor. Provide a shower in this room that is exactly 36 inches wide and 36 inches deep with a 48 inch long and 36 inch wide clear floor space alongside the shower opening, and an L-shaped shower seat mounted on the wall opposite the controls and extending the full depth of the stall; OR a shower that is at least 30 inches deep and 60 inches wide with no curb or threshold and with a 36 inch deep and 60 inch wide clear floor space at the shower opening. Ensure that the shower has grab bars, controls, a shower spray unit, and a seat, curb, enclosure (if provided), and towel rack that comply fully with the Standards and with Figs. 35, 36, and 37, as applicable. Standards §§ 4.1.3(11), 4.21, Figs. 35, 36, 37.

e. The women’s gang-style showers off the main hallway are up a 4 1/2 inch step, the shower controls are twist-style knob hardware, the shower heads are fixed at 48 inches above the finished floor, there are no grab bars, and the clothes hook is 63 inches above the finished floor. Provide a shower in this room that is exactly 36 inches wide and 36 inches deep with a 48 inch long and 36 inch wide clear floor space alongside the shower opening, and an L-shaped shower seat mounted on the wall opposite the controls and extending the full depth of the stall; OR a shower that is at least 30 inches deep and 60 inches wide with no curb or threshold and with a 36 inch deep and 60 inch wide clear floor space at the shower opening. Ensure that the shower has grab bars, controls, a shower spray unit, and a seat, curb, enclosure (if provided), and towel rack that comply fully with the Standards and with Figs. 35, 36, and 37, as applicable. Standards §§ 4.1.3(11), 4.21, Figs. 35, 36, 37.

f. Men’s Toilet Room with Stalls

i. Neither of the 2 urinals is accessible to persons who use wheelchairs. Provide a urinal with an elongated rim mounted 17 inches or less above the finished floor, a clear floor space of at least 30 inches wide and 48 inches deep centered on the urinal, and a flush control height of 44 inches or less above the finished floor. Standards §§ 4.1.3(11), 4.22.5, 4.18.2, 4.18.3, 4.18.4.

ii. The lavatory hot water and drain pipes are not insulated or configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards §§ 4.1.3(11), 4.22.6, 4.19.4.

iii. The lavatory has knob style hardware. Provide a lavatory with a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.1.3(11), 4.22.6, 4.19.5, 4.27.4.

iv. The mirror is not accessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.6, 4.19.6.

g. Women’s Toilet Room with Stalls

i. Although 1 of the 3 stalls is loosely configured to be a stall for ambulatory persons with disabilities, there is no stall for persons who use wheelchairs. Provide a “standard” accessible toilet stall at least 60 inches wide and at least 59 inches deep (or at least 56 inches deep with a wall-mounted toilet) such that all of the stall’s elements, including stall door, stall door hardware, water closet, size and arrangement, toe clearances, grab bars, controls, and dispensers, comply with the Standards. Standards §§ 4.1.3(11), 4.22.4, 4.22.7, 4.13, 4.16, 4.17, 4.26, 4.27, Fig. 30.

ii. The lavatory hot water and drain pipes are not insulated or configured to protect against contact. Provide hot water and drain pipes that are insulated or otherwise configured to protect against contact. Standards §§ 4.1.3(11), 4.22.6, 4.19.4.

iii. The lavatory has knob style hardware. Provide a lavatory with a faucet that can be operated with 5 pounds of force or less and can be used with one hand and without tight grasping, pinching, or twisting of the wrist (lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs). Standards §§ 4.1.3(11), 4.22.6, 4.19.5, 4.27.4.

iv. The mirror is not accessible. Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.3(11), 4.22.6, 4.19.6.

31. Within 12 months of the effective date of this Agreement, the City will complete the following to the Northside Senior Center:

a. The City has submitted renovation and addition plans and the Project Manual to the Department. The Department is reviewing these documents for compliance with the ADA. Upon completion of this review, the Department will notify the City of any modifications needed to bring the facility into full compliance with the ADA. The City will complete such modifications during the normal course of construction or within 3 months of receiving the Department’s notification, whichever is earlier.

b. The North ramp, which is relatively short, has handrails only on 1 side. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Standards §§ 4.1.2(1), 4.1.2(2), 4.8.5.

c. The handrails on the South ramp do not have ends that return smoothly and they do not extend at the bottom. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Standards §§ 4.1.2(1), 4.1.2(2), 4.8.5.

32. Within 12 months of the effective date of this Agreement, the City will complete the following to the Senior Citizens’ Center:

a. Although 9 of the 124 parking spaces are reserved for persons with disabilities, there are no spaces designated as “van-accessible.” On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space a minimum of 96 inches wide, served by an access aisle at least 96 inches wide, with a vertical sign with the International Symbol of Accessibility located such that it cannot be obstructed by parked vehicles, and with an additional “Van-Accessible” sign located below the International Symbol of Accessibility. Standards §§ 4.1.2(5)(b), 4.6, 4.30.7(1).

b. The slope of the ramp exceeds 1:12; there is only 1 handrail; there is no edge protection; there is no middle level landing despite a rise of more than 30 inches; and there is no level landing at the bottom of the ramp. Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides. Provide handrails that are between 1 1/4 inches and 1 1/2 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface. Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings. Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces. Standards §§ 4.1.2(1), 4.1.2(2), 4.3.8, 4.8.

c. The International Symbol of Accessibility should be removed from the side entrance, since it is not accessible.

(Return to Agreement)

Cases & Matters by ADA Title Coverage | Legal Documents by Type & Date | archive.ADA.gov Home Page

March 24, 2005

SETTLEMENT AGREEMENT BETWEEN

THE UNITED STATES OF AMERICA

AND

THE CITY OF GALLUP, NEW MEXICO

UNDER THE AMERICANS WITH DISABILITIES ACT

DJ 204-49-77

BACKGROUND

SCOPE OF THE INVESTIGATION

JURISDICTION

ACTIONS TAKEN BY CITY

REMEDIAL ACTION

NOTIFICATION

ADA COORDINATOR

GRIEVANCE PROCEDURE

GENERAL EFFECTIVE COMMUNICATION PROVISIONS

LAW ENFORCEMENT AND EFFECTIVE COMMUNICATION

EMPLOYMENT

VOTING

EMERGENCY MANAGEMENT PROCEDURES AND POLICIES

SIDEWALKS

WEB-BASED SERVICES AND PROGRAMS

PHYSICAL CHANGES TO FACILITIES

MISCELLANEOUS PROVISIONS

IMPLEMENTATION AND ENFORCEMENT

Attachment A to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

NOTICE UNDER THE AMERICANS WITH DISABILITIES ACT

Attachment B to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

The City of Gallup

Grievance Procedure under The Americans with Disabilities Act

Attachment C to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

CITY OF GALLUP POLICE DEPARTMENT POLICY STATEMENT REGARDING

EFFECTIVE COMMUNICATION WITH PEOPLE WHO ARE DEAF OR HARD OF HEARING

Attachment D to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

GUIDE FOR LAW ENFORCEMENT OFFICERS

When In Contact With People Who Are Deaf or Hard of Hearing

Attachment E to Settlement Agreement between the United States of America and
Gallup , New Mexico DJ# 204-49-77

Attachment H to Settlement Agreement between the United States of America and
Gallup , New Mexico DJ# 204-49-77

SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND THE CITY OF GALLUP, NEW MEXICO

UNDER THE AMERICANS WITH DISABILITIES ACT DJ 204-49-77

BACKGROUND

SCOPE OF THE INVESTIGATION

JURISDICTION

ACTIONS TAKEN BY CITY

REMEDIAL ACTION

NOTIFICATION

ADA COORDINATOR

GRIEVANCE PROCEDURE

GENERAL EFFECTIVE COMMUNICATION PROVISIONS

LAW ENFORCEMENT AND EFFECTIVE COMMUNICATION

EMPLOYMENT

VOTING

EMERGENCY MANAGEMENT PROCEDURES AND POLICIES

SIDEWALKS

WEB-BASED SERVICES AND PROGRAMS

PHYSICAL CHANGES TO FACILITIES

MISCELLANEOUS PROVISIONS

IMPLEMENTATION AND ENFORCEMENT

Attachment A to Settlement Agreement between the United States of America and Gallup, New Mexico DJ# 204-49-77

NOTICE UNDER THE AMERICANS WITH DISABILITIES ACT

Attachment B to Settlement Agreement between the United States of America and Gallup, New Mexico DJ# 204-49-77

The City of Gallup Grievance Procedure under The Americans with Disabilities Act

Attachment C to Settlement Agreement between the United States of America and Gallup, New Mexico DJ# 204-49-77

CITY OF GALLUP POLICE DEPARTMENT POLICY STATEMENT REGARDING EFFECTIVE COMMUNICATION WITH PEOPLE WHO ARE DEAF OR HARD OF HEARING

Attachment D to Settlement Agreement between the United States of America and Gallup, New Mexico DJ# 204-49-77

GUIDE FOR LAW ENFORCEMENT OFFICERS

When In Contact With People Who Are Deaf or Hard of Hearing

Attachment E to Settlement Agreement between the United States of America and Gallup , New Mexico DJ# 204-49-77

Attachment H to Settlement Agreement between the United States of America and Gallup , New Mexico DJ# 204-49-77

SETTLEMENT AGREEMENT BETWEEN

THE UNITED STATES OF AMERICA

AND

THE CITY OF GALLUP, NEW MEXICO

UNDER THE AMERICANS WITH DISABILITIES ACT

DJ 204-49-77

Attachment A to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

Attachment B to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

The City of Gallup

Grievance Procedure under The Americans with Disabilities Act

Attachment C to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

CITY OF GALLUP POLICE DEPARTMENT POLICY STATEMENT REGARDING

EFFECTIVE COMMUNICATION WITH PEOPLE WHO ARE DEAF OR HARD OF HEARING

Attachment D to Settlement Agreement between the United States of America and
Gallup, New Mexico DJ# 204-49-77

Attachment E to Settlement Agreement between the United States of America and
Gallup , New Mexico DJ# 204-49-77

Attachment H to Settlement Agreement between the United States of America and
Gallup , New Mexico DJ# 204-49-77